# Apple Watch Series 10 / 11 (42 mm)

> What are the Apple Watch Series 10 / 11 (42 mm) dimensions?

- Category: Phones, tablets & wearables › Smartwatches & wearables · 2024
- Kind: Modern device
- Basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio
- Page: https://xemstudio.com/objects/apple-watch-series-10-11-42-mm/ · JSON: https://xemstudio.com/api/geometry?object=apple-watch-series-10-11-42-mm · Plain text: https://xemstudio.com/objects/apple-watch-series-10-11-42-mm/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

## Overall (mm)

| length | width | height |
|---|---|---|
| 42.05 | 36.44 | 11.74 |

**Exact dimensions.** True size, with no tolerance added.

## Notes

- From Apple's published dimensional drawing for Apple Watch Series 11, 42 mm: 36.44 × 42.05 × 11.74 mm (case without crown; 9.7 mm flat of back to flat of cover glass, the rest is the back dome). The body file is the case band lofted through the drawing's own profile table and corner-point table, with the back dome as a spherical cap through its printed diameter and apex height; crown, buttons and band slots are not modelled. Hollow it for a bumper, or subtract it for a dock or stand pocket.
- Sizes are exact nominal millimetres, true size: add your own clearance.
- Apple's notes for accessory makers: 1 CASE DOES NOT INTERFERE WITH CLICK OR ROTATION FUNCTION OF DIGITAL CROWN; CASE DOES NOT APPLY FORCE ON DIGITAL CROWN; CASE DOES NOT OBSTRUCT FACE OF CROWN; 2 CASE DOES NOT OBSTRUCT THE WATCH ACOUSTIC OPENINGS AND ALTIMETER AND MUST NOT DEGRADE ACOUSTIC OR WATER EJECTION PERFORMANCE; 3. NO METAL CASES ALLOWED DUE TO ANTENNA FUNCTION; 4 CASE DOES NOT OBSTRUCT THE WATCH CHARGING INTERFACE; 5 CASE DOES NOT OBSTRUCT THE WATCH OPTICAL SENSORS; 6 CASE DOES NOT EXTEND BEYOND WATCH SENSOR WINDOWS; 7 CASE DOES NOT CONTACT THE WATCH COVER GLASS; 8 CASE DOES NOT CONTACT ELECTRICAL SENSORS; 9 CASE DOES N
- Apple Watch Series 10 / 11 (42 mm): 42 × 36 × 9.7 mm (height × width × depth), 1.65 × 1.42 × 0.38 in, 30 g, 1.65 in display.
- Band groups: 38/40/41/42 mm cases share bands (lug slot 20 mm wide); 44/45/46/49 mm cases share bands (lug slot 24 mm). Lug slot depth about 2.5 mm; the band connector is a 1.5 mm thick tongue with spring-loaded buttons.
- Charger puck: commonly given as Ø27.9 × 6.3 mm (magnetic fast charger); Apple does not publish it, so check yours before cutting a press-fit dock pocket (Ø28.2 for that size). See magsafe-and-watch-chargers.
- Compare with the rest of the family on the Apple Watch Series 10/11 (42, 46 mm), Ultra 2/3 (49 mm), SE (40, 44 mm) sheet.

## Sizes

| parameter | value |
|---|---|
| width × length × thickness | 36.44 × 42.05 × 11.74 mm |
| overall (as printed) | 36.44 (front view, case width without crown, unlabelled) |
| overall (as printed) | 38.30 WIDTH WITH CROWN |
| overall (as printed) | 42.05 (front view, case height, unlabelled) |
| overall (as printed) | 33.89 COVER GLASS (width) |
| overall (as printed) | 39.50 COVER GLASS (height) |
| overall (as printed) | 29.17 DISPLAY ACTIVE AREA (width) |
| overall (as printed) | 34.79 DISPLAY ACTIVE AREA (height) |
| overall (as printed) | 11.74 APEX OF DOME TO FLAT OF DISPLAY GLASS |
| overall (as printed) | 9.70 FLAT OF BACK TO FLAT OF DISPLAY GLASS |
| overall (as printed) | 0.67 (side view, near back; unlabelled) |
| display active area | 29.17 × 34.79 mm |
| corner profile points (x from side, y from top) | (0, 21.03); (0.02, 13.03); (0.35, 8.42); (1.57, 5.03); (3.19, 2.95); (5.33, 1.4); (8.78, 0.29); (13.22, 0.01); (18.22, 0) |
| edge profile (z from the flat of the back, inset) | (9.7, 6.83); (9.69, 5.61); (9.6, 4.32); (9.29, 3.05); (8.63, 1.86); (7.61, 0.88); (6.31, 0.23); (4.85, 0); (3.39, 0.23); (2.09, 0.88); (1.07, 1.86); (0.41, 3.05); (0.1, 4.32); (0.01, 5.61); (0, 6.83) |
| flat of back to flat of cover glass | 9.7 mm |
| back dome | Ø25.39 mm, apex 2.04 mm below the flat of the back |
| digital crown | Ø9.25 CROWN DIAL KEEPOUT; Ø7.25 CROWN DIAL; 7.92 CROWN CENTER (from datum 0.00 along side); 5.07 CROWN CENTER (z, from case-side datum); 2X 36.5° |
| mic port | Ø3.00 MIC KEEPOUT; 2.20 MIC PORT CENTER |
| side button | 0.20 BUTTON (top end); BUTTON CENTER -5.76; -11.72 BUTTON (bottom end); z: 2.95, 5.08 BUTTON CENTER, 7.20 |
| band slot | no band slot dimensions printed |
| speaker (left side) | SPEAKER KEEPOUT 2X 0.30 ALL AROUND (SECTION A-A) |
| cover glass clearance | note 7: 1.84 |
| back dome / sensors | Ø25.39 DOME DIAMETER; 1.00 ELECTRICAL SENSOR KEEPOUT; 2X DO NOT OBSTRUCT ELECTRICAL SENSORS; note 6 NO THICKNESS IN THIS REGION with 0.67 |
| band release buttons | 15.44 and -15.44 |
| SECTION B-B | 12.13°, 60.00°, 2.72°, 60.00° |
| charging | 0.86 MAXIMUM ALLOWABLE OFFSET FROM CHARGING PUCK CENTER; 12.13° (side view); note 2 DO NOT OBSTRUCT THIS PORT |

## Where the files are

- Apple (official): [Apple Watch Series 10 tech specs](https://support.apple.com/en-us/121202) — web — Manufacturer spec page
- Apple (official): [Apple Watch Ultra 2 tech specs](https://support.apple.com/en-us/111832) — web — Manufacturer spec page
- Apple (official): [Apple Watch band compatibility](https://support.apple.com/en-us/108774) — web — Manufacturer spec page
- Apple (official): [Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device)](https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf) — PDF — Apple developer terms; drawings for accessory design
- Apple: [Apple Watch Series 11, 42 mm dimensional drawing (Accessory Design Guidelines)](https://developer.apple.com/download/files/accessories/dimensional-drawings/apple-watch-series-11-42mm.pdf) — PDF — Apple's terms; linked, not hosted

## Free STEP/STL (1 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/apple-watch-series-10-11-42-mm/index.json

- apple-watch-series-10-11-42-mm-body: [STEP](https://xemstudio.com/files/hardware/apple-watch-series-10-11-42-mm/apple-watch-series-10-11-42-mm-body.step) · [STL](https://xemstudio.com/files/hardware/apple-watch-series-10-11-42-mm/apple-watch-series-10-11-42-mm-body.stl) — Apple Watch Series 11, 42 mm at true size: case band lofted through Apple's printed profile table (flat of back to flat of cover glass 9.7 mm), plan outline from the corner-point table; back dome drawn as a spherical cap through its printed Ø25.39 base and 2.04 mm apex height (its curvature is not dimensioned). Crown, buttons and band slots are not modelled.

## Questions

**How big is the Apple Watch Series 10 / 11 (42 mm) in inches?**

1.65 × 1.42 × 0.38 in (height × width × depth); 42 × 36 × 9.7 mm.

**What are the Apple Watch Series 10 / 11 (42 mm) dimensions in mm?**

42 × 36 × 9.7 mm, 30 g.

## Fits with

- [Apple Watch Series 10 / 11 (46 mm)](https://xemstudio.com/objects/apple-watch-series-10-11-46-mm/)
- [Apple Watch Ultra 2 / Ultra 3 (49 mm)](https://xemstudio.com/objects/apple-watch-ultra-2-ultra-3-49-mm/)
- [Apple Watch SE 2 (40 mm)](https://xemstudio.com/objects/apple-watch-se-2-40-mm/)
- [Apple Watch SE 2 (44 mm)](https://xemstudio.com/objects/apple-watch-se-2-44-mm/)
