Apple Watch Series 10 / 11 (46 mm) — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/apple-watch-series-10-11-46-mm/ (sheet CC BY 4.0) Basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio Catalog version: 2026-10-20 Overall (mm): length 46.0, width 39.76, height 12.14 - From Apple's published dimensional drawing for Apple Watch Series 11, 46 mm: 39.76 × 46 × 12.14 mm (case without crown; 9.7 mm flat of back to flat of cover glass, the rest is the back dome). The body file is the case band lofted through the drawing's own profile table and corner-point table, with the back dome as a spherical cap through its printed diameter and apex height; crown, buttons and band slots are not modelled. Hollow it for a bumper, or subtract it for a dock or stand pocket. - Sizes are exact nominal millimetres, true size: add your own clearance. - Apple's notes for accessory makers: 1 CASE DOES NOT INTERFERE WITH CLICK OR ROTATION FUNCTION OF DIGITAL CROWN; CASE DOES NOT APPLY FORCE ON DIGITAL CROWN; CASE DOES NOT OBSTRUCT FACE OF CROWN; 2 CASE DOES NOT OBSTRUCT THE WATCH ACOUSTIC OPENINGS AND ALTIMETER AND MUST NOT DEGRADE ACOUSTIC OR WATER EJECTION PERFORMANCE; 3. NO METAL CASES ALLOWED DUE TO ANTENNA FUNCTION; 4 CASE DOES NOT OBSTRUCT THE WATCH CHARGING INTERFACE; 5 CASE DOES NOT OBSTRUCT THE WATCH OPTICAL SENSORS; 6 CASE DOES NOT EXTEND BEYOND WATCH SENSOR WINDOWS; 7 CASE DOES NOT CONTACT THE WATCH COVER GLASS; 8 CASE DOES NOT CONTACT ELECTRICAL SENSORS; 9 CASE DOES N - Apple Watch Series 10 / 11 (46 mm): 46 × 39 × 9.7 mm (height × width × depth), 1.81 × 1.54 × 0.38 in, 36 g, 1.81 in display. - Band groups: 38/40/41/42 mm cases share bands (lug slot 20 mm wide); 44/45/46/49 mm cases share bands (lug slot 24 mm). Lug slot depth about 2.5 mm; the band connector is a 1.5 mm thick tongue with spring-loaded buttons. - Charger puck: commonly given as Ø27.9 × 6.3 mm (magnetic fast charger); Apple does not publish it, so check yours before cutting a press-fit dock pocket (Ø28.2 for that size). See magsafe-and-watch-chargers. - Compare with the rest of the family on the Apple Watch Series 10/11 (42, 46 mm), Ultra 2/3 (49 mm), SE (40, 44 mm) sheet. parameter value width × length × thickness 39.76 × 46 × 12.14 mm overall (as printed) 39.76 (front view, case width without crown, unlabelled) overall (as printed) 41.63 WIDTH WITH CROWN overall (as printed) 46.00 (front view, case height, unlabelled) overall (as printed) 37.21 DISPLAY GLASS (width) overall (as printed) 43.45 DISPLAY GLASS (height) overall (as printed) 32.45 DISPLAY ACTIVE AREA (width) overall (as printed) 38.69 DISPLAY ACTIVE AREA (height) overall (as printed) 12.14 APEX OF DOME TO FLAT OF DISPLAY overall (as printed) 9.70 FLAT OF BACK TO FLAT OF DISPLAY GLASS overall (as printed) 0.84 (side view near back, unlabelled) display active area 32.45 × 38.69 mm corner profile points (x from side, y from top) (0, 23); (0.02, 13.99); (0.34, 9.54); (1.39, 6.17); (3.38, 3.38); (6.17, 1.39); (9.53, 0.34); (13.69, 0.02); (19.88, 0) edge profile (z from the flat of the back, inset) (9.7, 6.83); (9.69, 5.61); (9.6, 4.32); (9.29, 3.05); (8.63, 1.86); (7.61, 0.88); (6.31, 0.23); (4.85, 0); (3.39, 0.23); (2.09, 0.88); (1.07, 1.86); (0.41, 3.05); (0.1, 4.32); (0.01, 5.61); (0, 6.83) flat of back to flat of cover glass 9.7 mm back dome Ø26.6 mm, apex 2.44 mm below the flat of the back digital crown Ø9.25 CROWN DIAL KEEPOUT; Ø7.25 CROWN DIAL; 8.66 CROWN CENTER; 5.07 CROWN CENTER (z); 2X 36.5° mic port Ø3.00 MIC KEEPOUT; 2.46 MIC PORT CENTER side button -0.03 BUTTON (top end); BUTTON CENTER -6.24; -12.46 BUTTON (bottom end); z: 2.94, 5.09 BUTTON CENTER, 7.20 band slot no band slot dimensions printed speaker (left side) SPEAKER KEEPOUT 2X 0.30 ALL AROUND (SECTION A-A) cover glass clearance note 7: 1.84 back dome / sensors Ø26.60 DOME DIAMETER; 1.00 ELECTRICAL SENSOR KEEPOUT; 2X DO NOT OBSTRUCT ELECTRICAL SENSORS; note 6 NO THICKNESS IN THIS REGION with 0.84 band release buttons 17.41 and -17.41 SECTION B-B 12.13°, 60.00°, 2.72°, 60.00° charging 0.86 MAXIMUM ALLOWABLE OFFSET FROM CHARGING PUCK CENTER; 12.13° (side view); note 2 DO NOT OBSTRUCT THIS PORT Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Apple (official): Apple Watch Series 10 tech specs — web — Manufacturer spec page — https://support.apple.com/en-us/121202 - Apple (official): Apple Watch Ultra 2 tech specs — web — Manufacturer spec page — https://support.apple.com/en-us/111832 - Apple (official): Apple Watch band compatibility — web — Manufacturer spec page — https://support.apple.com/en-us/108774 - Apple (official): Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device) — PDF — Apple developer terms; drawings for accessory design — https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf - Apple: Apple Watch Series 11, 46 mm dimensional drawing (Accessory Design Guidelines) — PDF — Apple's terms; linked, not hosted — https://developer.apple.com/download/files/accessories/dimensional-drawings/apple-watch-series-11-46mm.pdf Free files (CC BY 4.0, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/apple-watch-series-10-11-46-mm/index.json API: https://xemstudio.com/api/geometry?object=apple-watch-series-10-11-46-mm