Apple Watch Series 12 (42 mm case) — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/apple-watch-series-12-42-mm/ (sheet CC BY 4.0) Basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio Catalog version: 2026-10-20 Overall (mm): length 42.57, width 36.95, height 11.68 - From Apple's published dimensional drawing for Apple Watch Series 12, 42 mm: 36.95 × 42.57 × 11.68 mm (case without crown; 9.7 mm flat of back to flat of cover glass, the rest is the back dome). The body file is the case band lofted through the drawing's own profile table and corner-point table, with the back dome as a spherical cap through its printed diameter and apex height; crown, buttons and band slots are not modelled. Hollow it for a bumper, or subtract it for a dock or stand pocket. - Sizes are exact nominal millimetres, true size: add your own clearance. - The Apple Watch Series 12, 42 mm ceramic case variant has no body file: its printed profile table has no point on the widest line of the side wall, so a loft through its points comes out 0.05 mm under the printed width; its numbers are in the table. - Apple's notes for accessory makers: 1 CASE DOES NOT INTERFERE WITH CLICK OR ROTATION FUNCTION OF DIGITAL CROWN; CASE DOES NOT APPLY FORCE ON DIGITAL CROWN; CASE DOES NOT OBSTRUCT FACE OF CROWN; 2 CASE DOES NOT OBSTRUCT THE WATCH ACOUSTIC OPENINGS AND ALTIMETER AND MUST NOT DEGRADE ACOUSTIC OR WATER EJECTION PERFORMANCE; 3. NO METAL CASES ALLOWED DUE TO ANTENNA FUNCTION; 4 CASE DOES NOT OBSTRUCT THE WATCH CHARGING INTERFACE; 5 CASE DOES NOT OBSTRUCT THE WATCH OPTICAL SENSORS; 6 CASE DOES NOT EXTEND BEYOND WATCH SENSOR WINDOWS; 7 CASE DOES NOT CONTACT THE WATCH COVER GLASS; 8 CASE DOES NOT CONTACT ELECTRICAL SENSORS; 9 CASE DOES N - Apple Watch Series 12 (42 mm case) measures 42 × 37 × 9.7 mm (1.65 × 1.46 × 0.38 in) according to Apple; case height × width × depth without band, as published by Apple. - The ceramic version is slightly larger at 43 × 37 × 9.85 mm. - Weights are for the case only; bands are not included in any figure. - No CAD file: the maker publishes only overall sizes, and a plain box or cylinder is not useful design geometry. The table is the published data; parts with real geometry have their own pages. parameter value width × length × thickness 36.95 × 42.57 × 11.68 mm overall (as printed) 36.95 (front view, case width without crown, unlabelled) overall (as printed) 39.23 WIDTH INCLUDING CROWN overall (as printed) 42.57 (front view, case height, unlabelled) overall (as printed) 35.28 COVER GLASS (width) overall (as printed) 40.9 COVER GLASS (height) overall (as printed) 29.17 DISPLAY ACTIVE AREA (width) overall (as printed) 34.79 DISPLAY ACTIVE AREA (height) overall (as printed) 11.68 APEX OF DOME TO FLAT OF COVER GLASS overall (as printed) 9.7 FLAT OF BACK TO FLAT OF COVER GLASS overall (as printed) 0.59 (side view, at note 6, unlabelled) display active area 29.17 × 34.79 mm corner profile points (x from side, y from top) (0, 21.29); (0.02, 12.94); (0.32, 8.86); (1.29, 5.74); (3.15, 3.15); (5.74, 1.29); (8.86, 0.31); (12.68, 0.02); (18.48, 0) edge profile (z from the flat of the back, inset) (9.7, 6.92); (9.69, 5.65); (9.59, 4.32); (9.23, 3); (8.5, 1.8); (7.4, 0.83); (7.2, 0.57); (5.93, 0.11); (4.58, 0); (3.25, 0.27); (2.06, 0.91); (1.1, 1.87); (0.45, 3.05); (0.11, 4.37); (0.01, 5.72); (0, 7.08) flat of back to flat of cover glass 9.7 mm back dome Ø24.7 mm, apex 1.98 mm below the flat of the back digital crown Ø9.25 CROWN DIAL KEEPOUT; Ø7.00 CROWN DIAL; 7.55 CROWN CENTER; 5.07 CROWN CENTER (z); 2X 36.00° mic port Ø3.00 MIC KEEPOUT; 2.35 MIC PORT CENTER side button 0.47 BUTTON (top end); BUTTON CENTER -5.48; -11.42 BUTTON (bottom end); z: 3.58, 5.14 BUTTON CENTER, 6.68 band slot no band slot dimensions printed speaker (left side) SPEAKER KEEPOUT 2X 0.30 ALL AROUND (SECTION A-A) cover glass clearance note 7: 2.50 back dome / sensors Ø24.7 DOME DIAMETER; 1.00 ELECTRICAL SENSOR KEEPOUT; 32X DO NOT OBSTRUCT ELECTRICAL SENSORS; note 6 NO THICKNESS IN THIS REGION with 0.59 band release buttons 15.63 and -15.63 SECTION B-B 23.44°, 60.00°, 2.72°, 60.00° charging 0.86 MAXIMUM ALLOWABLE OFFSET FROM CHARGING PUCK CENTER; 23.82° (side view, section A-A angle); note 2 DO NOT OBSTRUCT THIS PORT Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Apple: Apple Watch Series 12 - Tech Specs - Apple Support — web — Publisher's page; dimensions are facts — https://support.apple.com/en-us/148589 - Apple: Apple Watch - Compare Models - Apple — web — Publisher's page; dimensions are facts — https://www.apple.com/watch/compare/ - Apple: Apple Watch Series 12, 42 mm dimensional drawing (Accessory Design Guidelines) — PDF — Apple's terms; linked, not hosted — https://developer.apple.com/download/files/accessories/dimensional-drawings/apple-watch-series-12-42mm.pdf Free files (CC BY 4.0, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/apple-watch-series-12-42-mm/index.json API: https://xemstudio.com/api/geometry?object=apple-watch-series-12-42-mm