Library › Phones, tablets & wearables › Apple Watch ·
Apple Watch Series 12 (46 mm case)
What are the dimensions of the Apple Watch Series 12 46mm? · Modern device · basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio
Also called: Apple Watch Series 12 46mm case size, Apple Watch Series 12 46mm charger stand dimensions, Apple Watch Series 12 46mm dimensions, Apple Watch Series 12 46mm size, Apple Watch Series 12 46mm size in mm, Apple Watch Series 12 46mm size in inches, Apple Watch Series 12 46mm measurements, how big is the Apple Watch Series 12 46mm, Apple Watch Series 12 46mm weight, dimensiones Apple Watch Series 12 46
Exact dimensions. True size, with no tolerance added.
- length
- 46.38 mm
- width
- 40.28 mm
- height
- 12.08 mm
Notes
- From Apple's published dimensional drawing for Apple Watch Series 12, 46 mm: 40.28 × 46.38 × 12.08 mm (case without crown; 9.7 mm flat of back to flat of cover glass, the rest is the back dome). The body file is the case band lofted through the drawing's own profile table and corner-point table, with the back dome as a spherical cap through its printed diameter and apex height; crown, buttons and band slots are not modelled. Hollow it for a bumper, or subtract it for a dock or stand pocket.
- Sizes are exact nominal millimetres, true size: add your own clearance.
- The Apple Watch Series 12, 46 mm ceramic case variant has no body file: its printed profile table has no point on the widest line of the side wall, so a loft through its points comes out 0.08 mm under the printed width; its numbers are in the table.
- Apple's notes for accessory makers: 1 CASE DOES NOT INTERFERE WITH CLICK OR ROTATION FUNCTION OF DIGITAL CROWN; CASE DOES NOT APPLY FORCE ON DIGITAL CROWN; CASE DOES NOT OBSTRUCT FACE OF CROWN; 2 CASE DOES NOT OBSTRUCT THE WATCH ACOUSTIC OPENINGS AND ALTIMETER AND MUST NOT DEGRADE ACOUSTIC OR WATER EJECTION PERFORMANCE; 3. NO METAL CASES ALLOWED DUE TO ANTENNA FUNCTION; 4 CASE DOES NOT OBSTRUCT THE WATCH CHARGING INTERFACE; 5 CASE DOES NOT OBSTRUCT THE WATCH OPTICAL SENSORS; 6 CASE DOES NOT EXTEND BEYOND WATCH SENSOR WINDOWS; 7 CASE DOES NOT CONTACT THE WATCH COVER GLASS; 8 CASE DOES NOT CONTACT ELECTRICAL SENSORS; 9 CASE DOES N
- Apple Watch Series 12 (46 mm case) measures 46 × 40 × 9.7 mm (1.81 × 1.57 × 0.38 in) according to Apple; case height × width × depth without band, as published by Apple.
- The ceramic version is slightly larger at 47 × 41 × 9.85 mm.
- Weights are for the case only; bands are not included in any figure.
- No CAD file: the maker publishes only overall sizes, and a plain box or cylinder is not useful design geometry. The table is the published data; parts with real geometry have their own pages.
Apple Watch Series 12 size chart
| parameter | value |
|---|---|
| width × length × thickness | 40.28 × 46.38 × 12.08 mm |
| overall (as printed) | 40.28 (front view, case width without crown, unlabelled) |
| overall (as printed) | 42.55 WIDTH INCLUDING CROWN |
| overall (as printed) | 46.38 (front view, case height, unlabelled) |
| overall (as printed) | 38.6 COVER GLASS (width) |
| overall (as printed) | 44.84 COVER GLASS (height) |
| overall (as printed) | 32.45 DISPLAY ACTIVE AREA (width) |
| overall (as printed) | 38.69 DISPLAY ACTIVE AREA (height) |
| overall (as printed) | 12.08 APEX OF DOME TO FLAT OF COVER GLASS |
| overall (as printed) | 9.7 FLAT OF BACK TO FLAT OF COVER GLASS |
| overall (as printed) | 0.76 (side view, at note 6, unlabelled) |
| display active area | 32.45 × 38.69 mm |
| corner profile points (x from side, y from top) | (0, 23.26); (0.03, 14.24); (0.35, 9.74); (1.42, 6.3); (3.46, 3.46); (6.31, 1.45); (9.74, 0.35); (13.94, 0.03); (20.14, 0) |
| edge profile (z from the flat of the back, inset) | (9.7, 6.83); (9.69, 5.61); (9.6, 4.32); (9.29, 3.05); (8.63, 1.86); (7.61, 0.88); (6.31, 0.23); (4.85, 0); (3.39, 0.23); (2.09, 0.88); (1.07, 1.86); (0.41, 3.05); (0.1, 4.32); (0.01, 5.61); (0, 6.83) |
| flat of back to flat of cover glass | 9.7 mm |
| back dome | Ø26.6 mm, apex 2.38 mm below the flat of the back |
| digital crown | Ø9.25 CROWN DIAL KEEPOUT; Ø7.00 CROWN DIAL; 8.26 CROWN CENTER; 5.07 CROWN CENTER (z); 2X 36.00° |
| mic port | Ø3.00 MIC KEEPOUT; 2.68 MIC PORT CENTER |
| side button | 0.41 BUTTON (top end); BUTTON CENTER -6.04; -12.49 BUTTON (bottom end); z: 3.59, 5.14 BUTTON CENTER, 6.69 |
| band slot | no band slot dimensions printed |
| speaker (left side) | SPEAKER KEEPOUT 2X 0.30 ALL AROUND (SECTION A-A) |
| cover glass clearance | note 7: 2.50 |
| back dome / sensors | Ø26.6 DOME DIAMETER; 1.00 ELECTRICAL SENSOR KEEPOUT; 32X DO NOT OBSTRUCT ELECTRICAL SENSORS; note 6 NO THICKNESS IN THIS REGION with 0.76 |
| band release buttons | 17.58 and -17.58 |
| SECTION B-B | 23.45°, 60.00°, 2.72°, 60.00° |
| charging | 0.86 MAXIMUM ALLOWABLE OFFSET FROM CHARGING PUCK CENTER; 23.44° (side view, section A-A angle); note 2 DO NOT OBSTRUCT THIS PORT |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Apple | Apple Watch Series 12 - Tech Specs - Apple Support | web | Publisher's page; dimensions are facts |
| Apple | Apple Watch - Compare Models - Apple | web | Publisher's page; dimensions are facts |
| Apple | Apple Watch Series 12, 46 mm dimensional drawing (Accessory Design Guidelines) | Apple's terms; linked, not hosted |
Free files
★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| apple-watch-series-12-46-mm-body | Apple Watch Series 12, 46 mm at true size: case band lofted through Apple's printed profile table (flat of back to flat of cover glass 9.7 mm), plan outline from the corner-point table; back dome drawn as a spherical cap through its printed Ø26.6 base and 2.38 mm apex height (its curvature is not dimensioned). Crown, buttons and band slots are not modelled. | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=apple-watch-series-12-46-mm

Fits with


Questions
How big is the Apple Watch Series 12 46mm?
Case height 46 mm, case width 40 mm, case depth 9.7 mm (1.81 × 1.57 × 0.38 in).
How much does the Apple Watch Series 12 46mm weigh?
39.5 g aluminium GPS; 38.6 g aluminium GPS + Cellular; 44.9 g titanium; 51.3–52.9 g ceramic (case only, per Apple).