Apple Watch Ultra 2 / Ultra 3 (49 mm) — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/apple-watch-ultra-2-ultra-3-49-mm/ (sheet CC BY 4.0) Basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed by Xem Studio Catalog version: 2026-10-20 Overall (mm): length 49.14, width 43.32, height 14.44 - From Apple's dimensional drawing for Apple Watch Ultra 3: the numbers below are as printed (Apple's drawing is linked, not copied). No body file: the drawing does not dimension the outline fully enough to build a true shape without guessing. - Apple's notes for accessory makers: 1 CASE DOES NOT INTERFERE WITH CLICK OR ROTATION FUNCTION OF DIGITAL CROWN; CASE DOES NOT APPLY FORCE ON DIGITAL CROWN; CASE DOES NOT OBSTRUCT FACE OF CROWN; 2 CASE DOES NOT OBSTRUCT THE WATCH ACOUSTIC OPENINGS AND ALTIMETER AND MUST NOT DEGRADE ACOUSTIC OR WATER EJECTION PERFORMANCE; 3 CASE DOES NOT OBSTRUCT THE WATCH CHARGING INTERFACE; 4 CASE DOES NOT OBSTRUCT THE WATCH OPTICAL SENSORS; 5 CASE DOES NOT EXTEND INTO WATCH SENSOR WINDOWS; 6 CASE DOES NOT CONTACT THE WATCH COVER GLASS AND DOES NOT OBSTRUCT THE GAP AROUND THE COVER GLASS; 7 CASE DOES NOT CONTACT ELECTRICAL SENSORS; 8 CASE DOES N - Apple Watch Ultra 2 / Ultra 3 (49 mm): 49 × 44 × 12 mm (height × width × depth), 1.93 × 1.73 × 0.47 in, 61 g, 1.92 in display. - Band groups: 38/40/41/42 mm cases share bands (lug slot 20 mm wide); 44/45/46/49 mm cases share bands (lug slot 24 mm). Lug slot depth about 2.5 mm; the band connector is a 1.5 mm thick tongue with spring-loaded buttons. - Charger puck: commonly given as Ø27.9 × 6.3 mm (magnetic fast charger); Apple does not publish it, so check yours before cutting a press-fit dock pocket (Ø28.2 for that size). See magsafe-and-watch-chargers. - Compare with the rest of the family on the Apple Watch Series 10/11 (42, 46 mm), Ultra 2/3 (49 mm), SE (40, 44 mm) sheet. parameter value width × length × thickness 43.32 × 49.14 × 14.44 mm overall (as printed) 43.32 (front view, overall width incl. crown guard/crown, unlabelled) overall (as printed) 35.79 COVER GLASS (width) overall (as printed) 49.14 (front view overall height, unlabelled) overall (as printed) 43.07 COVER GLASS (height) overall (as printed) 27.62 (front view, crown-side inner height between band slots, unlabelled) overall (as printed) 45.7 (left side view height, unlabelled) overall (as printed) 14.44 and 12.0 (top side view thickness dims, unlabelled) overall (as printed) 38.42 and 3.17 (bottom view: case width and crown protrusion, unlabelled) overall (as printed) 10.62 and 7.00 (bottom view heights, unlabelled) overall (as printed) 9.42 CROWN DIAMETER overall (as printed) 44.07 BACK CRYSTAL HEIGHT overall (as printed) 36.8 BACK CRYSTAL WIDTH display active area 32.92 × 40.09 mm digital crown 9.42 CROWN DIAMETER; crown keepout Ø10.42 KEEP OUT NO THICKNESS IN AREA SHOWN (right view); crown protrusion 3.17 band slot / lugs band slot ends at ±18.75 (acoustic views); DO NOT OBSTRUCT PORT IN BANDSLOT; no slot width printed back Ø27.3 (note 5 sensor window); band release buttons 19.48 and -19.48; 44.07 BACK CRYSTAL HEIGHT; 36.8 BACK CRYSTAL WIDTH; electrical sensor keepout Ø29.38 left acoustics and button (speaker, button, siren) speaker/button/siren: 18.75, 16.24, 12.30, 4.57, 3.10, 0.00, 18.60, -11.41, -12.55, -15.20; siren Ø2.65; z: 9.06, 7.24, 5.24, 3.42 (top) and 8.84, -6.24, 3.64, 0.00 (bottom) right acoustics and button (mics, crown, action/side button) 18.75, 16.24, 11.65, 6.44, 1.23, 0.69, 0.00, -0.31, -1.31, -1.71, -7.31, -12.91, -16.24, -18.75; crown keepout Ø10.42; mic Ø2.00; z: 5.24, 6.24, 7.24 (top) and 0.00, 3.64, 5.24, 6.24, 7.24, 8.84 (bott charging / sensors 3 0.86 CHARGING KEEPOUT DO NOT OBSTRUCT THE CHARGING INTERFACE NO THICKNESS ALLOWED; Ø29.38 7 ELECTRICAL SENSOR KEEP OUT NO THICKNESS ALLOWED IN THIS REGION; 1.00 and 0.77 6 OPTICAL AND ELECTRICAL SEN acoustic keep out cones SECTIONS AA (speaker), AB/AC/AD/AF (microphone), AE (siren): 60.00° cones, 0.00° axis, 0.50 ALL AROUND Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Apple (official): Apple Watch Series 10 tech specs — web — Manufacturer spec page — https://support.apple.com/en-us/121202 - Apple (official): Apple Watch Ultra 2 tech specs — web — Manufacturer spec page — https://support.apple.com/en-us/111832 - Apple (official): Apple Watch band compatibility — web — Manufacturer spec page — https://support.apple.com/en-us/108774 - Apple (official): Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device) — PDF — Apple developer terms; drawings for accessory design — https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf - Apple: Apple Watch Ultra 3 dimensional drawing (Accessory Design Guidelines) — PDF — Apple's terms; linked, not hosted — https://developer.apple.com/download/files/accessories/dimensional-drawings/apple-watch-ultra-3.pdf No true-size file yet: the published figures do not fix the whole shape; a measured scan is planned. API: https://xemstudio.com/api/geometry?object=apple-watch-ultra-2-ultra-3-49-mm