Library › Mechanisms › Screws ·

Archimedes screw rotor Ø60, pitch 60, 3 turns, Ø12 shaft

What are the proportions of an Archimedes screw? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: archimedes screw, screw pump rotor, water screw, tornillo de Arquímedes, Archimedische Schraube

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

length
60.0 mm
width
60.0 mm
height
220.0 mm

Notes

  • Single helical flight, Ø60 outside, 3 mm thick, pitch 60 mm (pitch = outside diameter, the classic proportion), 3 turns (180 mm) on a Ø12 shaft that runs 20 mm past each end.
  • Inclined at 30–40° in water it lifts a pocket per turn; it is a Xem Studio model following Brown's figure.
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Archimedes screw rotor Ø60, pitch 60, 3 turns, Ø12 shaft size chart

dimensionvalue
outside Ø60 mm
pitch60 mm
turns3
flight3 mm
shaftØ12 × 220 mm

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
flight edgeØ60 outside, pitch 60, 3 turns, flight 3tube bore Ø60 (drawn line on line)runarchimedes-screw-rotor*
shaftØ12 × 220, 20 past each endØ12 bearingsrunarchimedes-screw-rotor*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 443: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
archimedes-screw-rotor-60rotor, axis Z, flight z 0..180STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=archimedes-screw-rotor-60

Archimedes screw rotor Ø60, pitch 60, 3 turns, Ø12 shaft, isometric render of a generated part
Render of archimedes-screw-rotor-60 from the free STEP; not to scale.

Fits with

Questions

What are the proportions of an Archimedes screw?

Single helical flight, Ø60 outside, 3 mm thick, pitch 60 mm (pitch = outside diameter, the classic proportion), 3 turns (180 mm) on a Ø12 shaft that runs 20 mm past each end.