Library › Mechanisms › Screws ·

Archimedes screw casing tube Ø60 inside × 180

What tube does an Archimedes screw run in? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: screw pump casing, archimedes screw tube, tubo del tornillo de Arquímedes, Rohr der Archimedischen Schraube

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

length
70.0 mm
width
70.0 mm
height
180.0 mm

Notes

  • Ø70 / Ø60 tube, 180 mm long: the flight's Ø60 edge runs along its bore (drawn line-on-line; a real screw has a small gap or the tube turns with the screw, as in Brown's figure).
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Archimedes screw casing tube Ø60 inside × 180 size chart

dimensionvalue
boreØ60
outsideØ70
length180 mm

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
boreØ60 × 180 (Ø70 outside)rotor flight edge Ø60runarchimedes-screw-tube*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 443: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
archimedes-screw-tube-60tube, axis Z, z 0..180STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=archimedes-screw-tube-60

Archimedes screw casing tube Ø60 inside × 180, isometric render of a generated part
Render of archimedes-screw-tube-60 from the free STEP; not to scale.

Fits with

Questions

What tube does an Archimedes screw run in?

Ø70 / Ø60 tube, 180 mm long: the flight's Ø60 edge runs along its bore (drawn line-on-line; a real screw has a small gap or the tube turns with the screw, as in Brown's figure).