Arduino Mega 2560 R3 — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/arduino-mega-2560/ (sheet CC BY 4.0) Basis: Arduino MEGA 2560 Rev3 board file (Dimension layer) and datasheet mounting-hole drawing; numbers re-keyed, geometry built by Xem Studio Catalog version: 2026-10-20 Overall (mm): length 101.52, width 53.3 Mounting holes: 4 × Ø3.2 mm, pattern see official outline, screw M3 - From Arduino's MEGA 2560 Rev3 board file and datasheet drawing: true outline (stepped far edge, 1 mm corner radii) and all six Ø3.2 mounting holes; four of them sit where the UNO's do. - Sizes are exact nominal millimetres, true size: add your own clearance. - Uno-compatible header positions at the USB end; four mounting holes. - USB-B and barrel jack on the same short edge as the Uno. parameter value board 101.6 × 53.34 mm (4.0 × 2.1 in); USB-B and DC jack edge at x = 0 corners R1.0 on the three square corners; the far edge steps out 2.54 mm between y 5.08 and 37.85 hole 1 Ø3.2 at (13.97, 2.54) mm hole 2 Ø3.2 at (15.24, 50.8) mm hole 3 Ø3.2 at (66.04, 7.62) mm hole 4 Ø3.2 at (66.04, 35.56) mm hole 5 Ø3.2 at (90.17, 50.8) mm hole 6 Ø3.2 at (96.52, 2.54) mm UNO-compatible holes the four at (13.97, 2.54), (15.24, 50.8), (66.04, 7.62), (66.04, 35.56) match the UNO, so UNO stand-offs fit Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Arduino (official): Mega 2560 documentation, CAD files — STEP, DXF, PDF — see page [verify license at link] — https://docs.arduino.cc/hardware/mega-2560/ - Arduino (official): MEGA 2560 Rev3 design files (MEGA2560_Rev3e board) and datasheet mounting-hole drawing — EAGLE, PNG — CC BY-SA 4.0 (Arduino design files); numbers re-keyed, files not hosted — https://github.com/arduino/docs-content/tree/main/content/hardware/mega/boards/mega-2560 Free files (CC BY 4.0, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/arduino-mega-2560/index.json API: https://xemstudio.com/api/geometry?object=arduino-mega-2560