Arduino Nano (classic and Nano Every) — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/arduino-nano/ (sheet CC BY 4.0) Basis: Arduino Nano datasheet mechanical drawing; numbers re-keyed, geometry built by Xem Studio Catalog version: 2026-10-20 Overall (mm): length 45, width 18 Mounting holes: 4 × Ø1.8 mm, pattern at the corners, see outline, screw M1.6 - From Arduino's Nano mechanical drawing: board 43.2 × 18 × 1.6 mm with four Ø1.8 holes on 40.64 × 15.24 mm. Corners drawn square: radius not published. - Sizes are exact nominal millimetres, true size: add your own clearance. - Two 15-pin headers on 2.54 mm pitch, 15.24 mm apart; mini-USB (classic) or micro-USB (Every) on the short edge. - Nano 33 and Nano ESP32 share the outline. parameter value board 43.2 × 18 × 1.6 mm mounting holes 4 × Ø1.8 on 40.64 × 15.24 mm (1.6 × 0.6 in), centred on the board headers 2 × 15 pins, 2.54 mm pitch, rows 15.24 mm apart; ICSP 2 × 3 at 2.54 mm height with headers (side view) 18.6 mm overall with the ICSP pins; header pins 2.5 mm below the board hole position centred (Arduino's NanoV3.3 board file puts them 1.27 mm from each edge) corners drawn square: radius not published Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Arduino (official): Nano documentation, CAD files — STEP, DXF, PDF — see page [verify license at link] — https://docs.arduino.cc/hardware/nano/ - Arduino (official): Arduino Nano datasheet mechanical drawing (nano_mechanical_dimension) — EAGLE, PNG — CC BY-SA 4.0 (Arduino design files); numbers re-keyed, files not hosted — https://github.com/arduino/docs-content/tree/main/content/hardware/nano/boards/nano Free files (CC BY 4.0, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/arduino-nano/index.json API: https://xemstudio.com/api/geometry?object=arduino-nano