# Arduino Uno R3

> What are the Arduino Uno board dimensions and mounting holes?

- Category: Electronic components › Microcontroller boards · 2010
- Kind: Modern device
- Basis: Arduino UNO R3 board file (Dimension layer) and datasheet mounting-hole drawing; numbers re-keyed, geometry built by Xem Studio
- Page: https://xemstudio.com/objects/arduino-uno-r3/ · JSON: https://xemstudio.com/api/geometry?object=arduino-uno-r3 · Plain text: https://xemstudio.com/objects/arduino-uno-r3/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

## Overall (mm)

| length | width |
|---|---|
| 68.6 | 53.4 |

Mounting holes: 4 × Ø3.2 mm, pattern see official outline; holes are not on a rectangular grid mm, M3

**Exact dimensions.** True size, with no tolerance added.

## Notes

- From Arduino's own UNO R3 board file and datasheet drawing: the board file is the true outline (the stepped shield edge and 1 mm corner radii) with the four Ø3.2 mounting holes, which are not on a rectangle. Origin is the bottom-left corner at the USB/jack edge.
- Sizes are exact nominal millimetres, true size: add your own clearance.
- USB-B and DC barrel jack on the same short edge.
- Shield header spacing is the Uno standard (one 0.16 in offset).

## Sizes

| parameter | value |
|---|---|
| board | 68.58 × 53.34 mm (2.7 × 2.1 in); USB-B and DC jack edge at x = 0 |
| corners | R1.0 on the three square corners; the far edge steps out 2.54 mm between y 5.08 and 37.85 (45° chamfers) |
| hole 1 | Ø3.2 at (13.97, 2.54) mm |
| hole 2 | Ø3.2 at (15.24, 50.8) mm |
| hole 3 | Ø3.2 at (66.04, 7.62) mm |
| hole 4 | Ø3.2 at (66.04, 35.56) mm |
| hole spacing (datasheet) | 66.04 mm (2600 mil) bottom pair; 45.72 mm (1800 mil) and 17.78 mm (700 mil) on the far edge; top hole 15.24 mm in, 2.54 mm down |

## Where the files are

- Arduino (official): [UNO R3 documentation, CAD files](https://docs.arduino.cc/hardware/uno-rev3/) — STEP, DXF, PDF — see page (verify at link)
- Arduino (official): [UNO R3 design files (UNO-TH_Rev3e board) and datasheet mounting-hole drawing](https://github.com/arduino/docs-content/tree/main/content/hardware/uno/boards/uno-rev3) — EAGLE, PNG — CC BY-SA 4.0 (Arduino design files); numbers re-keyed, files not hosted

## Free STEP/STL (1 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/arduino-uno-r3/index.json

- arduino-uno-r3-board: [STEP](https://xemstudio.com/files/hardware/arduino-uno-r3/arduino-uno-r3-board.step) · [STL](https://xemstudio.com/files/hardware/arduino-uno-r3/arduino-uno-r3-board.stl) — UNO R3 board outline from Arduino's board file (the stepped shield edge, 1.0 mm corner radii) with the four Ø3.2 holes at their published positions; board drawn 1.6 mm thick: the maker does not print the thickness

## Questions

**What are the Arduino Uno R3 dimensions in mm?**

68.6 × 53.4 mm (length × width × height). USB-B and DC barrel jack on the same short edge.

**What is the Arduino Uno R3 mounting hole pattern?**

4 × Ø3.2 mm on a see official outline; holes are not on a rectangular grid mm pattern, M3 screws.

**Where is the official CAD for the Arduino Uno R3?**

Arduino (official): UNO R3 documentation, CAD files (STEP, DXF, PDF, see page). Linked from the sheet; Xem Studio does not rehost it.

## Fits with

- [Arduino Mega 2560 R3](https://xemstudio.com/objects/arduino-mega-2560/)
- [Arduino Nano (classic and Nano Every)](https://xemstudio.com/objects/arduino-nano/)
- [Threaded standoffs, M2.5 and M3 (hex and round)](https://xemstudio.com/objects/threaded-standoffs-metric/)
