Library › 3D printing › Hotends & nozzles ·
Capricorn XS PTFE Bowden tubing (1.75 mm filament)
What are the dimensions of the Capricorn XS PTFE tube? · Modern device · basis: Manufacturer specifications (Capricorn Automation)
Also called: capricorn xs tube dimensions, capricorn ptfe inner diameter, capricorn xs id od, 4mm od ptfe tube 1.9mm id, bowden tube 1.75 size, capricorn tubing specs, ptfe tube 2mm vs 1.9mm, capricorn xs bowden, tubo ptfe capricorn medidas, Capricorn PTFE Schlauch Innendurchmesser, tubo ptfe capricorn diâmetro
Exact dimensions. True size, with no tolerance added.
- length
- 3.95 mm
- width
- 3.95 mm
- height
- 100 mm
Notes
- Capricorn XS is the 1.75 mm-filament Bowden tube with a 1.90 mm bore and 3.95 mm outside, sold as a nominal 4 mm OD tube.
- The file is a 100 mm length of tube for fitting couplers and clips; cut length is up to you.
- Capricorn notes printer failures can happen well below the stated melting point.
- True size, no printing tolerance added. Only published numbers are used; anything not published is said so.
Capricorn XS PTFE Bowden tubing size chart
| dimension | value |
|---|---|
| Inner diameter | 1.90 ± 0.05 mm |
| Outer diameter | 3.95 ± 0.05 mm |
| Roundness | < 0.1 |
| Melting point | up to 340 °C |
| Colour | dark blue, opaque |
| Linear expansion at 250 °C | 2.2–3.3 % |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Capricorn Automation | Technical Specifications | web | Publisher's page; dimensions are facts |
Free files
★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| capricorn-xs-ptfe-tubing-sample | Tube Ø3.95 OD × Ø1.9 ID, 100 mm sample length (cut to need) | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=capricorn-xs-ptfe-tubing

Fits with



Questions
What is the inner diameter of Capricorn XS?
1.90 ± 0.05 mm, with a 3.95 ± 0.05 mm outer diameter.
Will Capricorn XS fit a 4 mm push-fit coupler?
Its published OD is 3.95 ± 0.05 mm, which is the nominal 4 mm size those couplers take.