Library › Home & kitchen › Kitchen appliances ·

Pot and pan lid sizes: how cookware is measured, lid knob M5 screw, replacement knob STL

What size lid fits my pan? · Standard part · basis: Cookware maker's sizing guide (rim measurement, reference sizes); lid knob thread as listed by a replacement-knob seller; knob is a Xem Studio design

Also called: pot lid sizes, frying pan sizes, lid knob replacement, pan size chart, lid organizer size

Exact dimensions. True size, with no tolerance added.

sizes
5 in table

Notes

  • Pans and pots are sized by the top rim, wall top to wall top, rounded down: a '12 in' pan measures between 12 and 13 in. Measure your rim before buying a lid; the cooking surface is much smaller.
  • Lids sit on or just inside the rim: a lid holder or rack slot for a nominal 28 cm lid wants about 290–300 mm of clearance.
  • Lid knobs: replacement knobs are commonly sold with an M5 screw (M5 × 24 listed) that goes up through the lid. The printed knobs here take that screw into an M5 nut in a top pocket; use a heat-resistant filament (PETG is marginal near a hot lid, ASA/PC better) or keep them for cold-storage lids.

Pot and pan lid sizes: how cookware is measured, lid knob M5 screw… size chart

nominalrim (in)rim (mm)cooking surface (in)
6 in6.84173.74.72
8 in8.5215.95.0
10 in10.5266.77.5
12 in12.5317.59.5
14 in14.0355.612.5

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Made In CookwareFrying pan sizes: how they are measuredwebPublisher's page; dimensions are facts
Replacement knob listing (Walmart)Pot lid knob, M5 × 24 screw, Ø57webPublisher's page; dimensions are facts

Free files

★ Free files 2 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
lid-knob-m5-35mmReplacement pot-lid knob Ø35, M5 screw from inside the lid into an M5 nut in the knob's top pocketSTEP · STL
lid-knob-m5-45mmReplacement pot-lid knob Ø45, M5 screw from inside the lid into an M5 nut in the knob's top pocketSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=cookware-lids-and-pans

Pot and pan lid sizes: how cookware is measured, lid knob M5 screw, replacement knob STL, isometric render of a generated part
Render of lid-knob-m5-45mm from the free STEP; not to scale.

Fits with

Questions

How are frying pans measured?

Across the top rim, wall top to wall top, rounded down to the nominal size.

What screw holds a pot lid knob?

Replacement knobs are commonly M5 (M5 × 24 listed).