Library › Boat design › Hull types ·

Deep-V hull

What is a deep-V hull and how much deadrise does it have? · Standard part · basis: Design rules and figures from the cited sources; example geometry by Xem Studio

Also called: deep v hull, deep vee, deadrise angle, deep v boat, rc deep vee, mono hull rc boat, v hull deadrise, 24 degree deadrise, deep v vs modified v, rough water hull, offshore hull

Exact dimensions. True size, with no tolerance added.

sizes
6 in table

Notes

  • Deadrise is the angle between the bottom and horizontal on each side of the keel. Deep-V hulls run about 21-25 deg at the transom, which slices through chop for a smoother, drier ride (BoatTest).
  • The cost is efficiency and stability: deep-Vs are harder to push, need more power, are more trim-sensitive and can roll at rest (BoatTest).
  • In RC, deep-V monos are preferred for heat racing in rough water; one builder's notes put deep-V at about 21-26 deg and recommend 19-23 deg for heat racing (SV Design).
  • Used on: Pro Boat Stealthwake (RC, 20 deg transom).
  • The file is a reference example built by Xem Studio from the numbers above (Reference RC mono: 585 mm length and 20 deg transom deadrise (SV Design Stealthwake data); 181 mm is an unlabelled width in the same source's deadrise diagram.). Sizes the sources do not fix are illustrative; scale the example to your own vehicle.

Deep-V hull size chart

parametervalue or rangesource
Deep-V transom deadrise21-25 deg (25 rare)BoatTest
Variable deadriseup to 60 deg forefoot, 30-45 deg amidshipsBoatTest
RC deep-V rangeabout 21-26 degSV Design (Stealthwake)
RC heat-racing sweet spot19-23 degSV Design (Stealthwake)
RC mono CG25-35% of length from transom, ~30% targetSV Design (Stealthwake)
RC mono CG (racer)about 28-30% with half tankModel Gas Boats forum

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

BoatTestTo Deep-V or Not to Deep-VwebPublisher's page; dimensions are facts
SV DesignPro Boat Stealthwake upgrades info (Feb 2022)webPublisher's page; dimensions are facts
Model Gas Boats forumNeed help setting up a mono for the first timewebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
deep-v-hull-hulldeep v hull, 585 × 181 mm, transom deadrise 22°, open-top shell (example parameters: depth 81.5 mm (0.45 B), wall 3 mm, sheer flared 4 % of B outboard of the chine, bow sheer +25 %; scale to your boat)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=deep-v-hull

Deep-V hull, isometric render of a generated part
Render of deep-v-hull-hull from the free STEP; not to scale.

Fits with

Questions

Why does a deep-V use more power?

More deadrise means less lift per wetted area, so it is harder to push (BoatTest).