# DIN rail, 35 mm (TS35 × 7.5, EN 60715)

> What are 35 mm DIN rail dimensions?

- Category: Hardware › Framing
- Kind: Hardware
- Basis: EN 60715 top-hat rail TS35 × 7.5
- Page: https://xemstudio.com/objects/din-rail-35mm/ · JSON: https://xemstudio.com/api/geometry?object=din-rail-35mm · Plain text: https://xemstudio.com/objects/din-rail-35mm/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- 35 mm wide (±0.3), 7.5 mm deep (15 mm deep version exists), 1 mm steel; lips 1 mm thick leave a 27 mm inner width. Mounting slots on 25 mm pitch down the centre.
- A clip hooks one lip and snaps over the other: the exact mating sizes are the 35.0 lip width and the 1.0 lip thickness (see Mating features).
- Files: the rail profile at 100 and 200 mm, for checking a printed enclosure clip.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| rail lips | 35.0 wide × 1.0 thick | DIN clip opening and hook | slide | din-rail-* |

## Sizes

| dimension | mm |
|---|---|
| width | 35 |
| depth (TS35 × 7.5) | 7.5 |
| depth (TS35 × 15) | 15 |
| lip thickness | 1.0 |
| inner width | 27 |
| slot pitch | 25 |

## Where the files are

- Wikipedia: [DIN rail](https://en.wikipedia.org/wiki/DIN_rail) — web — CC BY-SA 4.0 (text)
- McMaster-Carr: [DIN rail (free STEP/IGES/STL per part, for your own design use; no redistribution)](https://www.mcmaster.com/products/din-rail/) — STEP, IGES, STL, PDF — McMaster-Carr site terms: personal design use, no redistribution (verify at link)

## Free STEP/STL (2 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/din-rail-35mm/index.json

- din-rail-35x7.5-100: [STEP](https://xemstudio.com/files/hardware/din-rail-35mm/din-rail-35x7.5-100.step) · [STL](https://xemstudio.com/files/hardware/din-rail-35mm/din-rail-35x7.5-100.stl) — TS35 × 7.5 rail, 100 mm
- din-rail-35x7.5-200: [STEP](https://xemstudio.com/files/hardware/din-rail-35mm/din-rail-35x7.5-200.step) · [STL](https://xemstudio.com/files/hardware/din-rail-35mm/din-rail-35x7.5-200.stl) — TS35 × 7.5 rail, 200 mm

## Questions

**How wide is a DIN rail?**

35 mm (TS35), 7.5 mm deep for the common rail, 15 mm for the deep one. The older 15 mm and 32 mm G-rails are different standards.

**How do I design a 3D printed DIN rail clip?**

Hook one lip (1 mm thick, 35 mm outer width) and spring over the other with a catch. The clip's opening is 35.0 and its hook gap 1.0 at exact size; apply your process allowance to those two features.

## Fits with

- [Panel cutouts: IEC inlet, rockers, barrel jack, USB-C, HDMI, LEDs, Neutrik D](https://xemstudio.com/objects/panel-cutouts/)
- [Heat-set threaded inserts, metric: M2 to M10, standard, short and Voron (CNC Kitchen sizes)](https://xemstudio.com/objects/heat-set-inserts/)
- [DIN rail circuit breaker (MCB) dimensions, DIN 43880: 17.5 mm per pole, 18 mm module pitch, heights and depths by size](https://xemstudio.com/objects/din-rail-mcb-circuit-breaker-din-43880/)
- [DIN-rail terminal blocks Phoenix UT, ST and UK: width per pole 5.2 / 6.2 / 8.2 / 10.2 mm, height on the rail, wire range, strip length](https://xemstudio.com/objects/din-rail-terminal-blocks-phoenix-ut-st-uk/)
