Lever with two pawls driving a ratchet on both strokes — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/double-pawl-lever-ratchet-mechanism/ (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/) Basis: Xem Studio design following Brown No. 206 (1868) Catalog version: 2026-10-20 Sizes: see table below - Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, stays the same: ratchet, drive. - Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up. - A lever rocks on a fulcrum beside the ratchet wheel and carries two pawls, pinned one above and one below the fulcrum. Swinging the handle one way, the upper pawl pivot moves toward the wheel and its pawl pushes a tooth; swinging it back, the lower pivot moves toward the wheel and the lower pawl pushes another tooth, while the first slides back over the teeth. The wheel is driven the same way on both strokes, so the motion is nearly continuous. - Catalog Ø40, 24-tooth ratchet; both pawls drawn with their end faces lying on the steep faces of two teeth (face contact, no overlap) at the same instant. - Brown's No. 206 (lever with rising and falling pawls giving a nearly continuous rotary motion to a ratchet wheel). - Parts (each has its own page): ratchet-and-pawl, lever-pawl-24t-d40-upper, lever-pawl-24t-d40-lower, double-pawl-lever-fulcrum-handle-80, dowel-pins-metric. - Brown's movement No. 206 (1868) shows it; this model is a Xem Studio design following his figure, every part at true size. parameter value ratchet 24 T, Ø40 pawls 2, face contact drive both strokes, same direction Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Henry T. Brown (1868, public domain): Five Hundred and Seven Mechanical Movements — scan on archive.org — web — Publisher's page; dimensions are facts — https://archive.org/details/fivehundredseven00browiala - 507movements.com: Brown's movement No. 206: figure, his text and an animation — web — Publisher's page; dimensions are facts — https://507movements.com/mm_206.html Free files (Xem Studio Design License, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/double-pawl-lever-ratchet-mechanism/index.json API: https://xemstudio.com/api/geometry?object=double-pawl-lever-ratchet-mechanism