Library › Aircraft design › Control surfaces ·

Elevon

What are elevons? · Standard part · basis: Design rules and figures from the cited sources; example geometry by Xem Studio

Also called: elevons, elevon mixing, flying wing elevons, delta wing elevons, elevon throw, elevon rc, elevon vs aileron, v-tail elevon mix

Exact dimensions. True size, with no tolerance added.

sizes
2 in table

Notes

  • Elevons combine elevator and aileron: both move together for pitch and opposite for roll, which is how tailless wings and deltas are controlled.
  • Concorde used only six elevons, replacing elevators and ailerons, with no flaps or slats, where subsonic wings may have more than 50 movable devices (Heritage Concorde).
  • McCombs notes free-flight scale models can trim glide turns with elevons (Model Aviation).
  • Used on: Concorde.
  • The file is a reference example built by Xem Studio from the numbers above. Sizes the sources do not fix are illustrative; scale the example to your own vehicle.

Elevon size chart

parametervalue or rangesource
Concorde6 elevons; no flaps or slatsHeritage Concorde
Reference buildchord 200, 20% elevon, 15 degillustrative

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Heritage ConcordeThe WingwebPublisher's page; dimensions are facts
Model Aviation (AMA), W.F. McCombsWing and Tail Dihedral for Models (Dec 1994)webPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
elevon-wing-segmentelevon: wing segment 200 mm chord × 300 mm, 20 % chord surface deflected 15°STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=elevon

Elevon, isometric render of a generated part
Render of elevon-wing-segment from the free STEP; not to scale.

Fits with

Questions

Why do flying wings use elevons?

With no tail, the wing's trailing-edge surfaces must do both pitch and roll (Heritage Concorde).