Library › Mechanisms › Gears ·

Flat belt 16 × 1.5 for two Ø40 pulleys at 130 mm (loop drawn)

How long is this belt? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: flat belt, correa plana, Flachriemen

Exact dimensions. True size, with no tolerance added.

length
43.0 mm
width
173.0 mm
height
16.0 mm

Notes

  • Open flat belt 16 × 1.5 mm on two Ø40 pulleys 130 mm apart: inside length 2C + πD = 385.66 mm.
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Flat belt 16 × 1.5 for two Ø40 pulleys at 130 mm size chart

dimensionvalue
width × thickness16 × 1.5 mm
inside length385.66 mm

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 7: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
flat-belt-16x1-5-pulleys-40-40-c130belt loop in the XY plane, z 0..16STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=flat-belt-16x1-5-pulleys-40-40-c130

Flat belt 16 × 1.5 for two Ø40 pulleys at 130 mm (loop drawn), isometric render of a generated part
Render of flat-belt-16x1-5-pulleys-40-40-c130 from the free STEP; not to scale.

Fits with

Questions

How long is this belt?

Open flat belt 16 × 1.5 mm on two Ø40 pulleys 130 mm apart: inside length 2C + πD = 385.66 mm.