# 3D printable flat springs: serpentine zig-zag flexure, soft, medium and firm (STL, STEP)

> How do I 3D print a spring that actually works, without a coil?

- Category: Hardware › Springs & flexures
- Kind: Hardware
- Basis: Flat serpentine flexure spring (compliant mechanism); stiffness scales roughly with beam thickness cubed. Xem design.
- Page: https://xemstudio.com/objects/flat-serpentine-springs/ · JSON: https://xemstudio.com/api/geometry?object=flat-serpentine-springs · Plain text: https://xemstudio.com/objects/flat-serpentine-springs/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files Xem Studio Design License (free to use and sell from, not to redistribute as files: https://xemstudio.com/license/)
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

## Overall (mm)

| length | width | height |
|---|---|---|
| 20.6 | 76.0 | 8.0 |

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- 6 turns, 5 mm pitch, 14 mm amplitude, 8 mm tall, 8 mm end tabs with 3.2 mm (M3) holes.
- Relative stiffness: soft 0.3×, medium 1×, firm 2.4×.
- Prints flat, no supports. Keep travel to 10–15 % of length; PETG or nylon for repeated cycles.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| end tabs | M3 holes (3.2 mm) | M3 screw or pin | designed | all |

## Sizes

| file | beam t mm | overall mm |
|---|---|---|
| flat-spring-soft-t0.8 | 0.8 | 19.8 × 76 × 8 |
| flat-spring-medium-t1.2 | 1.2 | 20.2 × 76 × 8 |
| flat-spring-firm-t1.6 | 1.6 | 20.6 × 76 × 8 |

## Where the files are

- BYU Compliant Mechanisms Research Group: [Compliant Mechanisms Explained](https://compliantmechanisms.byu.edu/about-compliant-mechanisms) — web — Publisher's page; dimensions are facts
- BYU ScholarsArchive: [Merriam, E. G., Stiffness Reduction Strategies for Additively Manufactured Compliant Mechanisms](https://scholarsarchive.byu.edu/etd/5873) — web — Publisher's page; dimensions are facts

## Free STEP/STL (3 parts, Xem Studio Design License, Xem Studio)

Index: https://xemstudio.com/files/hardware/flat-serpentine-springs/index.json · license: https://xemstudio.com/files/hardware/flat-serpentine-springs/LICENSE.md

- flat-spring-soft-t0.8: [STEP](https://xemstudio.com/files/hardware/flat-serpentine-springs/flat-spring-soft-t0.8.step) · [STL](https://xemstudio.com/files/hardware/flat-serpentine-springs/flat-spring-soft-t0.8.stl) — Flat serpentine spring, soft: 0.8 mm beam, 8 mm wide, 6 turns at 5 mm pitch, 14 mm amplitude, M3 tab holes at both ends
- flat-spring-medium-t1.2: [STEP](https://xemstudio.com/files/hardware/flat-serpentine-springs/flat-spring-medium-t1.2.step) · [STL](https://xemstudio.com/files/hardware/flat-serpentine-springs/flat-spring-medium-t1.2.stl) — Flat serpentine spring, medium: 1.2 mm beam, 8 mm wide, 6 turns at 5 mm pitch, 14 mm amplitude, M3 tab holes at both ends
- flat-spring-firm-t1.6: [STEP](https://xemstudio.com/files/hardware/flat-serpentine-springs/flat-spring-firm-t1.6.step) · [STL](https://xemstudio.com/files/hardware/flat-serpentine-springs/flat-spring-firm-t1.6.stl) — Flat serpentine spring, firm: 1.6 mm beam, 8 mm wide, 6 turns at 5 mm pitch, 14 mm amplitude, M3 tab holes at both ends

## Questions

**Can you 3D print a working spring?**

Yes. A flat serpentine prints with no supports and flexes along its length; coils print poorly and break between layers.

**How do I make it stiffer or softer?**

Stiffness goes roughly with thickness cubed: 1.6 mm is about 2.4× the 1.2 mm, 0.8 mm about a third of it.

**What material is best?**

PETG or nylon for repeated flexing. PLA works for light, occasional use but creeps.

**How far does it stretch?**

Keep travel to about 10–15% of the spring length for long life.

## Fits with

- [Compression springs, wire Ø0.5–1.6, OD 6–16](https://xemstudio.com/objects/compression-springs/)
- [Extension springs, wire Ø0.6 and Ø1.0](https://xemstudio.com/objects/extension-springs/)
- [Planar spiral flexure bearing leaves: Ø40 to Ø120, 3-arm and 2-arm, 0.5 and 2 mm](https://xemstudio.com/objects/spiral-flexure-bearing/)
- [Living hinge (flexure hinge)](https://xemstudio.com/objects/living-hinge/)
- [Print-in-place: push button with flexure return and click](https://xemstudio.com/objects/print-in-place-push-button-flexure/)
