Library › Mechanisms › Linkages ·
Governor arm 80 mm with a Ø24 ball, Ø3 pivot and link holes
What is a governor arm? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance
Also called: governor arm, fly ball arm, brazo del regulador, Reglerarm (Fliehkraftpendel)
Exact dimensions. True size, with no tolerance added.
- length
- 98.0 mm
- width
- 24.0 mm
- height
- 24.0 mm
Notes
- 10 × 5 flat arm 45 mm long with a Ø3 pivot hole at the top and a Ø3 hole 40 mm down for the link to the sleeve, continued by a Ø4 rod that carries a Ø24 ball 80 mm from the pivot (the rod's end stands 1 mm out of the ball).
- Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).
Governor arm 80 mm with a Ø24 ball, Ø3 pivot and link holes size chart
| dimension | value |
|---|---|
| flat arm | 10 × 5, holes at 0 and 40 mm |
| rod | Ø4 |
| ball | Ø24, centre 80 mm from the pivot |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Henry T. Brown (1868, public domain) | Five Hundred and Seven Mechanical Movements — scan on archive.org | web | Publisher's page; dimensions are facts |
| 507movements.com | Brown's movement No. 161: figure, his text and an animation | web | Publisher's page; dimensions are facts |
| Xem Studio | drawing | web | Publisher's page; dimensions are facts |
Free files
★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| governor-arm-80-ball-24 | arm, pivot at the origin, along +X, z 0..5, ball centre at (80, 0, 2.5) | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=governor-arm-80-ball-24

Fits with
Questions
What is a governor arm?
10 × 5 flat arm 45 mm long with a Ø3 pivot hole at the top and a Ø3 hole 40 mm down for the link to the sleeve, continued by a Ø4 rod that carries a Ø24 ball 80 mm from the pivot (the rod's end stands 1 mm out of the ball).
