# Heat-set threaded inserts, ruthex RX series: M2 to M8 and #2-56 to 3/8-16

> What hole does a ruthex M3 insert need?

- Category: Hardware › Fasteners
- Kind: Standard part
- Basis: ruthex RX series datasheet (d1 insert Ø, d2 tip Ø, L, W min wall, d3 hole Ø); geometry drawn by Xem Studio from those numbers
- Page: https://xemstudio.com/objects/heat-set-inserts-ruthex/ · JSON: https://xemstudio.com/api/geometry?object=heat-set-inserts-ruthex · Plain text: https://xemstudio.com/objects/heat-set-inserts-ruthex/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Drawn as: lead-in pilot at the tip Ø over the bottom 15 % of the length, two knurl bands at the insert Ø with a relief groove between, thread as a plain bore at the minor diameter (threads not modelled). Knurl texture is not drawn: the insert Ø is the knurl's outside.
- Print the hole at the listed hole Ø, at least the insert length + 1 mm deep for a blind hole (room for displaced plastic), and keep at least W of wall around it. Press the insert in with a soldering iron and insert tip at the plastic's printing temperature until its top is flush.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| insert OD / tip | M2 Ø3.6 / 3.1; M2.5 4.6 / 3.9; M3 4.6 / 3.9 (5.0 / 4.25 for M3x5x4); M4 6.3 / 5.5; M5 7.1 / 6.3; M6 8.7 / 7.9; M8 10.1 / 9.5; 3/8-16 12.6 / 11.8 | install hole: M2 Ø3.2; M2.5 4.0; M3 4.0 (M3x5x4 4.4); M4 5.6; M5 6.4; M6 8.0; M8 9.6; inch #2-56 3.2, #4-40 4.0, #8-32 5.6, #10-24 6.4, 1/4-20 8.0, 3/8-16 11.9 | designed | insert-rx-* |
| depth and wall | length 4.0 to 12.7; min wall 1.3 / 1.6 / 2.1 / 2.6 / 3.3 / 4.5 / 6.0 | blind hole at least insert length + 1 deep; wall around the hole at least W | designed | insert-rx-* |

## Sizes

| article | thread | length_mm | insert_od_mm | tip_mm | hole_mm | min_wall_mm |
|---|---|---|---|---|---|---|
| RX-M2x4 | M2 | 4.0 | 3.6 | 3.1 | 3.2 | 1.3 |
| RX-M2.5x5.7 | M2.5 | 5.7 | 4.6 | 3.9 | 4.0 | 1.6 |
| RX-M3Sx4.0 | M3 | 4.0 | 4.6 | 3.9 | 4.0 | 1.6 |
| RX-M3x5x4 | M3 | 4.0 | 5.0 | 4.25 | 4.4 | 1.3 |
| RX-M3x5.7 | M3 | 5.7 | 4.6 | 3.9 | 4.0 | 1.6 |
| RX-M4Sx4.0 | M4 | 4.0 | 6.3 | 5.5 | 5.6 | 2.1 |
| RX-M4x8.1 | M4 | 8.1 | 6.3 | 5.5 | 5.6 | 2.1 |
| RX-M5Sx5.8 | M5 | 5.8 | 7.1 | 6.3 | 6.4 | 2.6 |
| RX-M5x9.5 | M5 | 9.5 | 7.1 | 6.3 | 6.4 | 2.6 |
| RX-M6x12.7 | M6 | 12.7 | 8.7 | 7.9 | 8.0 | 3.3 |
| RX-M8x12.7 | M8 | 12.7 | 10.1 | 9.5 | 9.6 | 4.5 |
| RX-2-56x4 | #2-56 | 4.0 | 3.6 | 3.1 | 3.2 | 1.3 |
| RX-4-40x5.7 | #4-40 | 5.7 | 4.6 | 3.9 | 4.0 | 1.6 |
| RX-8-32x8.1 | #8-32 | 8.1 | 6.3 | 5.5 | 5.6 | 2.1 |
| RX-10-24x9.5 | #10-24 | 9.5 | 7.1 | 6.3 | 6.4 | 2.6 |
| RX-1/4-20x12.7 | 1/4-20 | 12.7 | 8.7 | 7.9 | 8.0 | 3.3 |
| RX-3/8-16x12.7 | 3/8-16 | 12.7 | 12.6 | 11.8 | 11.9 | 6.0 |

## Where the files are

- ruthex: [RX series product datasheet: d1 insert Ø, d2 tip Ø, L, W min wall, d3 hole Ø (metric and UNC)](https://www.igo3d.com/mediafiles/Sonstiges/Ruthex/ruthex_Datenblatt_RX-Serie.pdf) — PDF — maker's sheet; dimensions cited, nothing copied

## Free STEP/STL (17 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/index.json

- insert-rx-m2x4: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m2x4.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m2x4.stl) — ruthex RX-M2x4: M2, Ø3.6 knurl, tip Ø3.1, 4 long; print hole Ø3.2 × ≥5, wall ≥ 1.3
- insert-rx-m2_5x5_7: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m2_5x5_7.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m2_5x5_7.stl) — ruthex RX-M2.5x5.7: M2.5, Ø4.6 knurl, tip Ø3.9, 5.7 long; print hole Ø4 × ≥6.7, wall ≥ 1.6
- insert-rx-m3sx4_0: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m3sx4_0.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m3sx4_0.stl) — ruthex RX-M3Sx4.0: M3, Ø4.6 knurl, tip Ø3.9, 4 long; print hole Ø4 × ≥5, wall ≥ 1.6
- insert-rx-m3x5x4: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m3x5x4.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m3x5x4.stl) — ruthex RX-M3x5x4: M3, Ø5 knurl, tip Ø4.25, 4 long; print hole Ø4.4 × ≥5, wall ≥ 1.3
- insert-rx-m3x5_7: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m3x5_7.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m3x5_7.stl) — ruthex RX-M3x5.7: M3, Ø4.6 knurl, tip Ø3.9, 5.7 long; print hole Ø4 × ≥6.7, wall ≥ 1.6
- insert-rx-m4sx4_0: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m4sx4_0.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m4sx4_0.stl) — ruthex RX-M4Sx4.0: M4, Ø6.3 knurl, tip Ø5.5, 4 long; print hole Ø5.6 × ≥5, wall ≥ 2.1
- insert-rx-m4x8_1: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m4x8_1.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m4x8_1.stl) — ruthex RX-M4x8.1: M4, Ø6.3 knurl, tip Ø5.5, 8.1 long; print hole Ø5.6 × ≥9.1, wall ≥ 2.1
- insert-rx-m5sx5_8: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m5sx5_8.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m5sx5_8.stl) — ruthex RX-M5Sx5.8: M5, Ø7.1 knurl, tip Ø6.3, 5.8 long; print hole Ø6.4 × ≥6.8, wall ≥ 2.6
- insert-rx-m5x9_5: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m5x9_5.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m5x9_5.stl) — ruthex RX-M5x9.5: M5, Ø7.1 knurl, tip Ø6.3, 9.5 long; print hole Ø6.4 × ≥10.5, wall ≥ 2.6
- insert-rx-m6x12_7: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m6x12_7.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m6x12_7.stl) — ruthex RX-M6x12.7: M6, Ø8.7 knurl, tip Ø7.9, 12.7 long; print hole Ø8 × ≥13.7, wall ≥ 3.3
- insert-rx-m8x12_7: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m8x12_7.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m8x12_7.stl) — ruthex RX-M8x12.7: M8, Ø10.1 knurl, tip Ø9.5, 12.7 long; print hole Ø9.6 × ≥13.7, wall ≥ 4.5
- insert-rx-2-56x4: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-2-56x4.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-2-56x4.stl) — ruthex RX-2-56x4: #2-56, Ø3.6 knurl, tip Ø3.1, 4 long; print hole Ø3.2 × ≥5, wall ≥ 1.3
- insert-rx-4-40x5_7: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-4-40x5_7.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-4-40x5_7.stl) — ruthex RX-4-40x5.7: #4-40, Ø4.6 knurl, tip Ø3.9, 5.7 long; print hole Ø4 × ≥6.7, wall ≥ 1.6
- insert-rx-8-32x8_1: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-8-32x8_1.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-8-32x8_1.stl) — ruthex RX-8-32x8.1: #8-32, Ø6.3 knurl, tip Ø5.5, 8.1 long; print hole Ø5.6 × ≥9.1, wall ≥ 2.1
- insert-rx-10-24x9_5: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-10-24x9_5.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-10-24x9_5.stl) — ruthex RX-10-24x9.5: #10-24, Ø7.1 knurl, tip Ø6.3, 9.5 long; print hole Ø6.4 × ≥10.5, wall ≥ 2.6
- insert-rx-1-4-20x12_7: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-1-4-20x12_7.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-1-4-20x12_7.stl) — ruthex RX-1/4-20x12.7: 1/4-20, Ø8.7 knurl, tip Ø7.9, 12.7 long; print hole Ø8 × ≥13.7, wall ≥ 3.3
- insert-rx-3-8-16x12_7: [STEP](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-3-8-16x12_7.step) · [STL](https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-3-8-16x12_7.stl) — ruthex RX-3/8-16x12.7: 3/8-16, Ø12.6 knurl, tip Ø11.8, 12.7 long; print hole Ø11.9 × ≥13.7, wall ≥ 6

## Questions

**ruthex M3 × 5.7 hole?**

Ø4.0 (same as CNC Kitchen's M3 × 5.7), 1.6 wall.

## Fits with

- [Heat-set threaded inserts, metric: M2 to M10, standard, short and Voron (CNC Kitchen sizes)](https://xemstudio.com/objects/heat-set-inserts/)
- [Heat-set threaded inserts, inch: #2-56 to 3/8-16 and G1/8 (CNC Kitchen sizes)](https://xemstudio.com/objects/heat-set-inserts-inch/)
- [Heat-set insert holes: hole cutters and test bosses for every insert size](https://xemstudio.com/objects/heat-set-insert-holes/)
- [Rivet nuts (blind threaded inserts), flat head: hole size, grip range, body and flange dimensions, M3–M12 and #6-32 to 3/8-16](https://xemstudio.com/objects/rivet-nuts-flat-head/)
