Library › Drone design › Drone frame layouts ·

Hybrid X frame

What is a hybrid X frame? · Standard part · basis: Design rules and figures from the cited sources; example geometry by Xem Studio

Also called: hybrid x, mild deadcat, fpv hybrid frame, hx frame, hybrid x quad, all round frame, hybrid vs true x

Exact dimensions. True size, with no tolerance added.

sizes
2 in table

Notes

  • UAVModel describes hybrid X as a 'moderate deadcat' between true X and deadcat: minimal props in view with near-symmetric roll and pitch and slightly reduced yaw.
  • The file is a reference example built by Xem Studio from the numbers above (Reference 5-inch build: 220 mm diagonal within Grepow's 210-250 mm class for 5 in props.). Sizes the sources do not fix are illustrative; scale the example to your own vehicle.

Hybrid X frame size chart

parametervalue or rangesource
Prop viewminimal propsUAVModel
5 in prop frame size210-250 mm diagonal (motor to motor)Grepow

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

UAVModel blogFPV Frame Geometry: Deadcat vs True X vs Squashed X (2026 guide)webPublisher's page; dimensions are facts
GrepowWhat size FPV drone should I get?webPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
hybrid-x-frame-layoutdeadcat frame layout: 220 mm motor-to-motor diagonal, 5 in props (discs show the swept area; arms and plate illustrative)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=hybrid-x-frame

Hybrid X frame, isometric render of a generated part
Render of hybrid-x-frame-layout from the free STEP; not to scale.

Fits with

Questions

Good all-rounder?

UAVModel calls it the all-around compromise.