Library › Phones, tablets & wearables › Other phones · 2023 ·

iPhone 15 Plus

What are the iPhone 15 Plus dimensions? · Modern device · basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio

Also called: iphone 15 plus size, iphone 15 plus measurements

Exact dimensions. True size, with no tolerance added.

length
160.89 mm
width
77.76 mm
height
7.81 mm

Notes

  • From Apple's published dimensional drawing for iPhone 15 Plus: 77.76 × 160.89 × 7.81 mm. The body file is built from the drawing's own numbers (corner-profile points, edge profile, camera and port positions): hollow it for a case, or subtract it (plus the case-cutouts file) to make a pocket, dock, tray or mount.
  • Apple's notes for case makers: case thickness on the back 2.1 mm max; do not obstruct ports, cameras, flash or sensors; no metal contact; no magnets on the back except MagSafe.
  • Sizes are exact nominal millimetres, true size: add your own clearance (for a printed case, typically a few tenths of a mm all round).
  • iPhone 15 Plus: 160.9 × 77.8 × 7.8 mm (height × width × depth), 6.33 × 3.06 × 0.31 in, 201 g, 6.7 in display.
  • First USB-C iPhones. 15 Pro / Pro Max introduce the Action button in place of the mute switch; titanium frame with a thinner bezel than the 14 Pro (hence the smaller body).
  • Compare with the rest of the family on the iPhone 15, 15 Plus, 15 Pro, 15 Pro Max (2023) sheet.

iPhone 15 Plus size chart

parametervalue
width × length × thickness77.76 × 160.89 × 7.81 mm
front glass75.76 × 158.89 mm
display active area71.21 × 154.34 mm
corner profile points (x from side, y from top)(0, 17.4); (0.04, 13.21); (0.59, 9.06); (2.29, 5.24); (5.24, 2.29); (9.06, 0.59); (13.21, 0.04); (17.4, 0)
back glass to camera plateau1.85 mm
back glass to rear camera glass3.48 mm
camera plateau (from the back-view datum corner)x 1.22–37.15, y 1.22–37.15 mm
rear camera 1 centre(12.73, 12.73) mm, Ø15.07
rear camera 2 centre(25.64, 25.64) mm, Ø15.07
flash centre(27.32, 11.06) mm, Ø6.28
USB-C connector keep-out12.45 × 6.6 mm, R3.25, centred 38.88 mm from the left edge
ring/silent switch (left)centred 31.94 mm below the top, stands 0.6 proud
volume up (left)centred 45.39 mm below the top, stands 0.45 proud
volume down (left)centred 59.59 mm below the top, stands 0.45 proud
SIM tray (left)centred 110.72 mm below the top
side button (right)centred 52.49 mm below the top, stands 0.45 proud
case thickness on the back (max)2.1 mm

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Apple (official)iPhone 15 tech specswebManufacturer spec page
Apple (official)iPhone 15 Pro tech specswebManufacturer spec page
Apple (official)Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device)PDFApple developer terms; drawings for accessory design
AppleiPhone 15 Plus dimensional drawing (Accessory Design Guidelines)PDFApple's terms; linked, not hosted

Free files

★ Free files 2 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
iphone-15-plus-bodyiPhone 15 Plus at true size: outline from Apple's corner-profile points, side profile, camera (camera plateau drawn to its dimensioned extent and clipped to the outline: its corner shape is not dimensioned) Sides drawn straight: the drawing does not dimension the edge profile.STEP · STL
iphone-15-plus-case-cutoutsCase openings: port keep-out pushed 14 mm outward, camera plateau footprint through the back (subtract from your case)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=iphone-15-plus

iPhone 15 Plus, isometric render of a generated part
Render of iphone-15-plus-body from the free STEP; not to scale.

Fits with

Questions

How big is the iPhone 15 Plus in inches?

6.33 × 3.06 × 0.31 in (height × width × depth); 160.9 × 77.8 × 7.8 mm.

What are the iPhone 15 Plus dimensions in mm?

160.9 × 77.8 × 7.8 mm, 201 g.