Library › Phones, tablets & wearables › Other phones · 2024 ·

iPhone 16 Plus

What are the iPhone 16 Plus dimensions? · Modern device · basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio

Also called: iphone 16 plus size, iphone 16 plus measurements

Exact dimensions. True size, with no tolerance added.

length
160.89 mm
width
77.76 mm
height
7.81 mm

Notes

  • From Apple's published dimensional drawing for iPhone 16 Plus: 77.76 × 160.89 × 7.81 mm. The body file is built from the drawing's own numbers (corner-profile points, edge profile, camera and port positions): hollow it for a case, or subtract it (plus the case-cutouts file) to make a pocket, dock, tray or mount.
  • Apple's notes for case makers: case thickness on the back 2.1 mm max; do not obstruct ports, cameras, flash or sensors; no metal contact; no magnets on the back except MagSafe.
  • Sizes are exact nominal millimetres, true size: add your own clearance (for a printed case, typically a few tenths of a mm all round).
  • iPhone 16 Plus: 160.9 × 77.8 × 7.8 mm (height × width × depth), 6.33 × 3.06 × 0.31 in, 199 g, 6.7 in display.
  • All four have the Action button (left, above volume) and Camera Control (right, lower). 16 and 16 Plus have a vertical two-lens pill; the Pros have the square three-lens island about 4 mm proud.
  • iPhone 16 Pro and iPhone 17 share the 149.6 × 71.5 footprint but not the depth or camera layout.
  • Compare with the rest of the family on the iPhone 16, 16 Plus, 16 Pro, 16 Pro Max (2024) sheet.

iPhone 16 Plus size chart

parametervalue
width × length × thickness77.76 × 160.89 × 7.81 mm
front glass75.76 × 158.89 mm
display active area71.21 × 154.34 mm
corner profile points (x from side, y from top)(0, 17.4); (0.04, 13.21); (0.59, 9.06); (2.3, 5.24); (5.25, 2.29); (9.06, 0.59); (13.21, 0.04); (17.4, 0)
edge profile (z from mid-plane, inset)(3.77, 0.81); (3.5, 0.4); (3.09, 0.13); (2.61, 0.02); (2.12, 0); (1.62, 0)
back glass to camera plateau1.85 mm
back glass to rear camera glass3.48 mm
camera plateau (from the back-view datum corner)x 1.09–26.16, y 1.25–43.72 mm
rear camera 1 centre(13.62, 13.62) mm, Ø16
rear camera 2 centre(13.62, 31.34) mm, Ø16
flash centre(30.01, 22.48) mm, Ø6.28
USB-C connector keep-out12.45 × 6.6 mm, R3.25, centred 38.88 mm from the left edge
action button (left)centred 34.08 mm below the top, ±3.45 mm, stands 0.45 proud
volume up (left)centred 48.23 mm below the top, ±5.6 mm, stands 0.45 proud
volume down (left)centred 62.43 mm below the top, ±5.6 mm, stands 0.45 proud
SIM tray (left)centred 104.1 mm below the top, ±9.82 mm
side button (right)centred 55.33 mm below the top, ±8.85 mm, stands 0.45 proud
camera control (right)centred 109.48 mm below the top, ±8.55 mm
case thickness on the back (max)2.1 mm

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Apple (official)iPhone 16 tech specswebManufacturer spec page
Apple (official)iPhone 16 Pro tech specswebManufacturer spec page
Apple (official)Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device)PDFApple developer terms; drawings for accessory design
AppleiPhone 16 Plus dimensional drawing (Accessory Design Guidelines)PDFApple's terms; linked, not hosted

Free files

★ Free files 2 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
iphone-16-plus-bodyiPhone 16 Plus at true size: outline from Apple's corner-profile points, side profile, camera (camera plateau drawn to its dimensioned extent and clipped to the outline: its corner shape is not dimensioned)STEP · STL
iphone-16-plus-case-cutoutsCase openings: port keep-out pushed 14 mm outward, camera plateau footprint through the back (subtract from your case)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=iphone-16-plus

iPhone 16 Plus, isometric render of a generated part
Render of iphone-16-plus-body from the free STEP; not to scale.

Fits with

Questions

How big is the iPhone 16 Plus in inches?

6.33 × 3.06 × 0.31 in (height × width × depth); 160.9 × 77.8 × 7.8 mm.

What are the iPhone 16 Plus dimensions in mm?

160.9 × 77.8 × 7.8 mm, 199 g.