iPhone 16e — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/iphone-16e/ (sheet CC BY 4.0) Basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio Catalog version: 2026-10-20 Overall (mm): length 146.71, width 71.52, height 7.8 - From Apple's published dimensional drawing for iPhone 16e: 71.52 × 146.71 × 7.8 mm. The body file is built from the drawing's own numbers (corner-profile points, edge profile, camera and port positions): hollow it for a case, or subtract it (plus the case-cutouts file) to make a pocket, dock, tray or mount. - Apple's notes for case makers: case thickness on the back 2.1 mm max; do not obstruct ports, cameras, flash or sensors; no metal contact; no magnets on the back except MagSafe. - Sizes are exact nominal millimetres, true size: add your own clearance (for a printed case, typically a few tenths of a mm all round). - iPhone 16e: 146.7 × 71.5 × 7.8 mm (height × width × depth), 5.78 × 2.81 × 0.31 in, 167 g, 6.1 in display. - The 17 Pro / Pro Max camera plateau spans the full width of the back; the Air has a full-width bar near the top; 17 and 16e keep a corner island. Depth figures exclude the camera: add about 4 mm for the Pro plateau when sizing a pocket. - Case design: corner radius, Action button, Camera Control, USB-C and speaker positions are all in the Accessory Design Guidelines drawings; the overall numbers here are enough for a shelf, dock or holder with 0.5 mm clearance per side. - A measured Xem scan of each body is planned: exact plateau height and lens positions are what the published drawings leave to the accessory maker. - Compare with the rest of the family on the iPhone 17, iPhone Air, iPhone 17 Pro, 17 Pro Max, iPhone 16e (2025) sheet. parameter value width × length × thickness 71.52 × 146.71 × 7.8 mm front glass 69.42 × 144.61 mm display active area 64.58 × 139.77 mm corner profile points (x from side, y from top) (0, 16.14); (0, 11.63); (0.06, 7.2); (3.22, 3.4); (6.97, 0.95); (11.38, 0.07); (15.89, 0) edge profile (z from mid-plane, inset) (3.82, 0.91); (3.79, 0.49); (3.54, 0.14); (3.14, 0.01); (2.71, 0) back glass to rear camera glass 1.68 mm rear camera 1 centre (13.32, 13.32) mm, Ø14.97 flash centre (29.68, 13.32) mm, Ø3.75 USB-C connector keep-out 12.45 × 6.6 mm, R3.25, centred 35.76 mm from the left edge action button (left) centred 31.28 mm below the top, ±3.77 mm, stands 0.45 proud volume up (left) centred 45.43 mm below the top, ±5.92 mm, stands 0.45 proud volume down (left) centred 59.63 mm below the top, ±5.92 mm, stands 0.45 proud SIM tray (left) centred 110.04 mm below the top, ±7.97 mm side button (right) centred 52.53 mm below the top, ±9.17 mm, stands 0.45 proud case thickness on the back (max) 2.1 mm Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Apple (official): iPhone 17 tech specs — web — Manufacturer spec page — https://support.apple.com/en-us/125089 - Apple (official): iPhone 17 Pro tech specs — web — Manufacturer spec page — https://www.apple.com/iphone-17-pro/specs/ - Apple (official): iPhone Air tech specs — web — Manufacturer spec page — https://www.apple.com/iphone-air/specs/ - Apple (official): Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device) — PDF — Apple developer terms; drawings for accessory design — https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf - Apple: iPhone 16e dimensional drawing (Accessory Design Guidelines) — PDF — Apple's terms; linked, not hosted — https://developer.apple.com/download/files/accessories/dimensional-drawings/iphone-16e.pdf Free files (CC BY 4.0, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/iphone-16e/index.json API: https://xemstudio.com/api/geometry?object=iphone-16e