iPhone Air — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/iphone-air/ (sheet CC BY 4.0) Basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio Catalog version: 2026-10-20 Overall (mm): length 156.18, width 74.7, height 5.64 - From Apple's published dimensional drawing for iPhone Air: 74.7 × 156.18 × 5.64 mm. The body file is built from the drawing's own numbers (corner-profile points, edge profile, camera and port positions): hollow it for a case, or subtract it (plus the case-cutouts file) to make a pocket, dock, tray or mount. - The camera plateau (3.03 mm above the back glass) is not modelled: Apple's drawing gives its height but not its outline. Leave room for it. - Apple's notes for case makers: case thickness on the back 2.1 mm max; do not obstruct ports, cameras, flash or sensors; no metal contact; no magnets on the back except MagSafe. - Sizes are exact nominal millimetres, true size: add your own clearance (for a printed case, typically a few tenths of a mm all round). - iPhone Air: 156.2 × 74.8 × 5.64 mm (height × width × depth), 6.15 × 2.94 × 0.22 in, 165 g, 6.5 in display. - The 17 Pro / Pro Max camera plateau spans the full width of the back; the Air has a full-width bar near the top; 17 and 16e keep a corner island. Depth figures exclude the camera: add about 4 mm for the Pro plateau when sizing a pocket. - Case design: corner radius, Action button, Camera Control, USB-C and speaker positions are all in the Accessory Design Guidelines drawings; the overall numbers here are enough for a shelf, dock or holder with 0.5 mm clearance per side. - A measured Xem scan of each body is planned: exact plateau height and lens positions are what the published drawings leave to the accessory maker. - Compare with the rest of the family on the iPhone 17, iPhone Air, iPhone 17 Pro, 17 Pro Max, iPhone 16e (2025) sheet. parameter value width × length × thickness 74.7 × 156.18 × 5.64 mm front glass 72.42 × 153.9 mm display active area 69.55 × 151.03 mm corner profile points (x from side, y from top) (0.04, 13.85); (0.91, 8.43); (3.78, 3.78); (8.43, 0.91); (13.85, 0.04) back glass to camera plateau 3.03 mm back glass to rear camera glass 5.68 mm rear camera 1 centre (16.29, 16.29) mm, Ø15.82 flash centre (58.42, 16.29) mm, Ø6.3 USB-C connector keep-out 12.45 × 6.6 mm, R3.25, centred 37.35 mm from the left edge action button (left) centred 34.08 mm below the top, ±3.45 mm, stands 0.45 proud volume up (left) centred 48.23 mm below the top, ±5.6 mm, stands 0.45 proud volume down (left) centred 62.43 mm below the top, ±5.6 mm, stands 0.45 proud side button (right) centred 55.33 mm below the top, ±8.9 mm, stands 0.45 proud camera control (right) centred 104.77 mm below the top, ±8.55 mm case thickness on the back (max) 2.1 mm Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Apple (official): iPhone 17 tech specs — web — Manufacturer spec page — https://support.apple.com/en-us/125089 - Apple (official): iPhone 17 Pro tech specs — web — Manufacturer spec page — https://www.apple.com/iphone-17-pro/specs/ - Apple (official): iPhone Air tech specs — web — Manufacturer spec page — https://www.apple.com/iphone-air/specs/ - Apple (official): Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device) — PDF — Apple developer terms; drawings for accessory design — https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf - Apple: iPhone Air dimensional drawing (Accessory Design Guidelines) — PDF — Apple's terms; linked, not hosted — https://developer.apple.com/download/files/accessories/dimensional-drawings/iphone-air.pdf Free files (CC BY 4.0, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/iphone-air/index.json API: https://xemstudio.com/api/geometry?object=iphone-air