Library › Computers & desk › Docks, hubs & chargers ·

MagSafe charger puck and Apple Watch charger dimensions, MagSafe case thickness limit

What is the diameter of the MagSafe charger? · Modern device · basis: Caliper measurements from a charger review site, a teardown and makers (MagSafe 25 W); Apple's accessory guidelines as reported by the press; Apple product listings for cable lengths

Also called: magsafe charger diameter, magsafe puck dimensions, apple watch charger size, magsafe stand 3d print, magsafe case thickness

Exact dimensions. True size, with no tolerance added.

sizes
4 in table

Notes

  • MagSafe 25 W charger (2024+): Ø55.4–55.5 mm, 4.45–4.53 mm thick (three independent caliper measurements); braided cable about Ø2.35, 1 m or 2 m.
  • Original 15 W MagSafe charger: makers report it slightly larger and thicker (about Ø56 × 5.4) but no reliable measurement is published; measure yours before cutting a press-fit pocket.
  • MagSafe accessories (Apple's guidelines, as reported): case thickness over the magnet ring 2.0 mm recommended, 2.1 mm maximum; self-alignment within 1.55 mm; removal force 800–1,100 gf.
  • Apple Watch magnetic fast charger: commonly given as Ø27.9 × 6.3 mm with a radial cable exit; Apple does not publish it, so check yours. The older puck is about 2 mm thicker (maker report). Cable 1 m.
  • Inserts (free STL): the puck face sits flush, the cable leaves through the slot; glue into a stand or screw through the floor.

MagSafe charger puck and Apple Watch charger dimensions, MagSafe… size chart

itemdiameter (mm)thickness (mm)
MagSafe charger 25 W55.4–55.54.45–4.53
MagSafe charger 15 W (unverified)≈56≈5.4
Apple Watch fast charger (unverified)27.96.3
MagSafe case limit over the ringNone2.0 rec. / 2.1 max

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

ChargerLABReview of the Apple 25 W MagSafe charger (caliper measurements)webPublisher's page; dimensions are facts
ChargerLABTeardown of the Apple 25 W MagSafe chargerwebPublisher's page; dimensions are facts
MakerWorld (maker measurement)MagSafe 25 W puck holder: 55.49 × 4.53webPublisher's page; dimensions are facts
9to5MacApple's accessory design guidelines: MagSafe detailswebPublisher's page; dimensions are facts
AppleMagSafe Charger (1 m)webPublisher's page; dimensions are facts
Printables (maker notes)MagSafe phone and watch standwebPublisher's page; dimensions are facts

Free files

★ Free files 2 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
magsafe-25w-dock-insertDock insert for the MagSafe 25 W puck: Ø55.8 pocket 4.6 deep, 3 mm cable slotSTEP · STL
watch-charger-dock-insertDock insert for the Apple Watch fast charger puck: Ø28.2 pocket 6.4 deep (check your puck: see notes)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=magsafe-and-watch-chargers

MagSafe charger puck and Apple Watch charger dimensions, MagSafe case thickness limit, isometric render of a generated part
Render of magsafe-25w-dock-insert from the free STEP; not to scale.

Fits with

Questions

What size is the MagSafe charger?

The 25 W MagSafe puck is about 55.5 mm across and 4.5 mm thick.

How thick can a MagSafe case be?

Apple recommends 2.0 mm over the magnet ring, 2.1 mm maximum.