# Neodymium disc magnets, common sizes

> What pocket size do 6×3 and 10×3 magnets need in a 3D print?

- Category: Hardware › Magnets, plates & discs
- Kind: Hardware
- Basis: standard disc sizes; nominal, N35–N52 share dimensions
- Page: https://xemstudio.com/objects/neodymium-disc-magnets/ · JSON: https://xemstudio.com/api/geometry?object=neodymium-disc-magnets · Plain text: https://xemstudio.com/objects/neodymium-disc-magnets/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Common sizes: Ø6 × 3, Ø8 × 3, Ø10 × 3, Ø12 × 3, Ø5 × 2, Ø3 × 1 mm (tolerance about ±0.1 mm).
- Magnet pockets are drawn at the magnet's diameter and thickness. A 0.5 mm floor between magnet and the mating part keeps pull strong and the surface smooth.
- Polarity: mark north on the pair before gluing.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| disc | Ø × t (3×1 … 12×3) | magnet pocket | press | magnet-* |

## Sizes

| size | dia_mm | thick_mm | press_fit_hole_mm | glue_hole_mm |
|---|---|---|---|---|
| 3x1 | 3 | 1 | 3.15 | 3.4 |
| 5x2 | 5 | 2 | 5.15 | 5.4 |
| 6x3 | 6 | 3 | 6.15 | 6.4 |
| 8x3 | 8 | 3 | 8.15 | 8.4 |
| 10x3 | 10 | 3 | 10.2 | 10.4 |
| 12x3 | 12 | 3 | 12.2 | 12.4 |

## Where the files are

- McMaster-Carr: [Magnets (free STEP/IGES/STL per part, for your own design use; no redistribution)](https://www.mcmaster.com/products/magnets/) — STEP, IGES, STL, PDF — McMaster-Carr site terms: personal design use, no redistribution (verify at link)
- Wikipedia: [Neodymium magnet](https://en.wikipedia.org/wiki/Neodymium_magnet) — web — CC BY-SA 4.0 (text)

## Free STEP/STL (6 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/neodymium-disc-magnets/index.json

- magnet-3x1: [STEP](https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-3x1.step) · [STL](https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-3x1.stl) — disc Ø3 × 1
- magnet-5x2: [STEP](https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-5x2.step) · [STL](https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-5x2.stl) — disc Ø5 × 2
- magnet-6x3: [STEP](https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-6x3.step) · [STL](https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-6x3.stl) — disc Ø6 × 3
- magnet-8x3: [STEP](https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-8x3.step) · [STL](https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-8x3.stl) — disc Ø8 × 3
- magnet-10x3: [STEP](https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-10x3.step) · [STL](https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-10x3.stl) — disc Ø10 × 3
- magnet-12x3: [STEP](https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-12x3.step) · [STL](https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-12x3.stl) — disc Ø12 × 3

## Questions

**What hole size for a 6x3 mm magnet in a 3D print?**

Draw the pocket Ø6 × 3 deep and apply your press allowance to its diameter. Leave a 0.5 mm floor between the magnet and the mating face.

**What size pocket for an 8x3 and 10x3 neodymium magnet?**

8×3: 8.15 mm press / 8.4 mm glue. 10×3: 10.15 mm press / 10.4 mm glue. Tolerance on the magnets is about ±0.1 mm.

**How strong is a 6x3 mm N52 magnet?**

Roughly 1 kg pull against mild steel in direct contact; through a 0.5 mm printed floor expect about half that. Pair magnets north-to-south and mark polarity before gluing.

## Fits with

- [Heat-set threaded inserts, metric: M2 to M10, standard, short and Voron (CNC Kitchen sizes)](https://xemstudio.com/objects/heat-set-inserts/)
- [Dowel pins, 2–6 mm (ISO 2338 / DIN 6325)](https://xemstudio.com/objects/dowel-pins-metric/)
