# Nyloc lock nuts, M2.5–M8 (DIN 985)

> How thick is an M3 nyloc nut?

- Category: Hardware › Fasteners
- Kind: Hardware
- Basis: DIN 985 / ISO 10511 (thin type is lower; values are the common DIN 985)
- Page: https://xemstudio.com/objects/nyloc-nuts-metric/ · JSON: https://xemstudio.com/api/geometry?object=nyloc-nuts-metric · Plain text: https://xemstudio.com/objects/nyloc-nuts-metric/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Same across-flats as a plain nut, taller because of the nylon collar: M3 is 4.0 mm vs 2.4 mm plain. A nut pocket is the AF and the full height (see Mating features).
- Not reusable more than a few times; don't rely on them on a printed part that will be opened often.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| hex | AF × h (M3 5.5 × 4.0) | nut pocket | press | nyloc-* |

## Sizes

| thread | width_af_mm | height_mm |
|---|---|---|
| M2.5 | 5.0 | 2.9 |
| M3 | 5.5 | 4.0 |
| M4 | 7.0 | 5.0 |
| M5 | 8.0 | 5.0 |
| M6 | 10.0 | 6.0 |
| M8 | 13.0 | 8.0 |

## Where the files are

- McMaster-Carr: [Nylon-insert locknuts (free STEP/IGES/STL per part, for your own design use; no redistribution)](https://www.mcmaster.com/products/nylon-insert-locknuts/) — STEP, IGES, STL, PDF — McMaster-Carr site terms: personal design use, no redistribution (verify at link)
- Wikipedia: [Nyloc nut](https://en.wikipedia.org/wiki/Nyloc_nut) — web — CC BY-SA 4.0 (text)

## Free STEP/STL (6 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/nyloc-nuts-metric/index.json

- nyloc-m2.5: [STEP](https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m2.5.step) · [STL](https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m2.5.stl) — DIN 985 M2.5, 5.0 AF × 2.9 high
- nyloc-m3: [STEP](https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m3.step) · [STL](https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m3.stl) — DIN 985 M3, 5.5 AF × 4.0 high
- nyloc-m4: [STEP](https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m4.step) · [STL](https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m4.stl) — DIN 985 M4, 7.0 AF × 5.0 high
- nyloc-m5: [STEP](https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m5.step) · [STL](https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m5.stl) — DIN 985 M5, 8.0 AF × 5.0 high
- nyloc-m6: [STEP](https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m6.step) · [STL](https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m6.stl) — DIN 985 M6, 10.0 AF × 6.0 high
- nyloc-m8: [STEP](https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m8.step) · [STL](https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m8.stl) — DIN 985 M8, 13.0 AF × 8.0 high

## Questions

**How tall is an M3 nyloc nut?**

4.0 mm (5.5 mm across flats); an M4 is 5.0 mm (7 AF), M5 5.0 mm (8 AF), M6 6.0 mm (10 AF), M8 8.0 mm (13 AF).

**Can I print a pocket for a nyloc nut?**

Yes: the exact pocket is the nut's across-flats (5.5 mm for M3) and full height (4.0 mm); apply your process allowance to it. The nylon collar must face away from the screw entry.

## Fits with

- [Hex nuts, M2–M8 (ISO 4032)](https://xemstudio.com/objects/hex-nuts-metric/)
- [Socket head cap screws, M2–M8 (ISO 4762 / DIN 912)](https://xemstudio.com/objects/socket-head-cap-screws-metric/)
- [Flat washers, M2–M8 (ISO 7089)](https://xemstudio.com/objects/flat-washers-metric/)
- [Nylon-insert lock nuts (nyloc), ISO 7040 and DIN 985, M3–M36: width across flats, height, bearing diameter + M10–M30 envelope files](https://xemstudio.com/objects/nylon-insert-lock-nuts-iso-7040-din-985/)
- [Nylon-insert lock nuts, inch (ASME B18.16.6): 1/4 to 1-1/2 width across flats, across corners, height](https://xemstudio.com/objects/nylon-insert-lock-nuts-inch-asme-b18-16-6/)
- [All-metal prevailing-torque lock nuts: DIN 980 V / M, ISO 7042 M5–M36 and inch Stover-type / top-lock nuts — across flats, height](https://xemstudio.com/objects/prevailing-torque-all-metal-nuts/)
