Library › Hardware › Gears, cranks & flywheels ·
Parallel keys DIN 6885 form A: 2 × 2 to 18 × 11, with keyway depths
What key size goes on a 20 mm shaft? · Standard part · basis: DIN 6885-1 parallel keys and keyways: key b × h by shaft diameter, shaft keyway depth t1, hub keyway depth t2, standard lengths
Also called: din 6885 key size chart, keyway dimensions metric, 20mm shaft key size, parallel key cad
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 11 in table
Notes
- Form A: both ends round (radius b/2), for end-milled keyways. Keyway width = b; cut t1 into the shaft and t2 into the hub.
Parallel keys DIN 6885 form A: 2 × 2 to 18 × 11, with keyway depths size chart
| shaft (mm) | key b x h | shaft depth t1 | hub depth t2 | lengths (mm) |
|---|---|---|---|---|
| 6–8 | 2 × 2 | 1.2 | 1.0 | 6–20 |
| 8–10 | 3 × 3 | 1.8 | 1.4 | 6–36 |
| 10–12 | 4 × 4 | 2.5 | 1.8 | 8–45 |
| 12–17 | 5 × 5 | 3.0 | 2.3 | 10–56 |
| 17–22 | 6 × 6 | 3.5 | 2.8 | 14–70 |
| 22–30 | 8 × 7 | 4.0 | 3.3 | 18–90 |
| 30–38 | 10 × 8 | 5.0 | 3.3 | 22–110 |
| 38–44 | 12 × 8 | 5.0 | 3.3 | 28–140 |
| 44–50 | 14 × 9 | 5.5 | 3.8 | 36–160 |
| 50–58 | 16 × 10 | 6.0 | 4.3 | 45–180 |
| 58–65 | 18 × 11 | 7.0 | 4.4 | 50–200 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| key | b × h per file name (2×2 to 18×11), width tol h9 | shaft and hub keyways of width b | slide | key-* |
| shaft keyway | width b: N9 (P9 if the hub is clamped on the key); depth t1 by b×h: 2×2 1.2, 3×3 1.8, 4×4 2.5, 5×5 3.0, 6×6 3.5, 8×7 4.0, 10×8 5.0, 12×8 5.0, 14×9 5.5, 16×10 6.0, 18×11 7.0 | key seats in it, shaft ranges 6–8 up to 58–65 | slide | key-* |
| hub keyway | width b: Js9 (P9 if clamped on the key); depth t2 by b×h: 2×2 1.0, 3×3 1.4, 4×4 1.8, 5×5 2.3, 6×6 2.8, 8×7 3.3, 10×8 3.3, 12×8 3.3, 14×9 3.8, 16×10 4.3, 18×11 4.4 | hub bore for the same shaft range | slide | key-* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| DIN | DIN 6885-1 Drive type fastenings without taper action; parallel keys, keyways, deep pattern | standard | DIN; dimensions are facts verify |
Free files
★ Free files 150 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| key-2x2x6 | key 2 × 2 × 6, form A (round ends) for shafts over 6 up to 8 mm: shaft keyway depth 1.2, hub 1.0 | STEP · STL |
| key-2x2x8 | key 2 × 2 × 8, form A (round ends) for shafts over 6 up to 8 mm: shaft keyway depth 1.2, hub 1.0 | STEP · STL |
| key-2x2x10 | key 2 × 2 × 10, form A (round ends) for shafts over 6 up to 8 mm: shaft keyway depth 1.2, hub 1.0 | STEP · STL |
| key-2x2x12 | key 2 × 2 × 12, form A (round ends) for shafts over 6 up to 8 mm: shaft keyway depth 1.2, hub 1.0 | STEP · STL |
| key-2x2x14 | key 2 × 2 × 14, form A (round ends) for shafts over 6 up to 8 mm: shaft keyway depth 1.2, hub 1.0 | STEP · STL |
| key-2x2x16 | key 2 × 2 × 16, form A (round ends) for shafts over 6 up to 8 mm: shaft keyway depth 1.2, hub 1.0 | STEP · STL |
| key-2x2x18 | key 2 × 2 × 18, form A (round ends) for shafts over 6 up to 8 mm: shaft keyway depth 1.2, hub 1.0 | STEP · STL |
| key-2x2x20 | key 2 × 2 × 20, form A (round ends) for shafts over 6 up to 8 mm: shaft keyway depth 1.2, hub 1.0 | STEP · STL |
| key-3x3x6 | key 3 × 3 × 6, form A (round ends) for shafts over 8 up to 10 mm: shaft keyway depth 1.8, hub 1.4 | STEP · STL |
| key-3x3x8 | key 3 × 3 × 8, form A (round ends) for shafts over 8 up to 10 mm: shaft keyway depth 1.8, hub 1.4 | STEP · STL |
| key-3x3x10 | key 3 × 3 × 10, form A (round ends) for shafts over 8 up to 10 mm: shaft keyway depth 1.8, hub 1.4 | STEP · STL |
| key-3x3x12 | key 3 × 3 × 12, form A (round ends) for shafts over 8 up to 10 mm: shaft keyway depth 1.8, hub 1.4 | STEP · STL |
| key-3x3x14 | key 3 × 3 × 14, form A (round ends) for shafts over 8 up to 10 mm: shaft keyway depth 1.8, hub 1.4 | STEP · STL |
| key-3x3x16 | key 3 × 3 × 16, form A (round ends) for shafts over 8 up to 10 mm: shaft keyway depth 1.8, hub 1.4 | STEP · STL |
| key-3x3x18 | key 3 × 3 × 18, form A (round ends) for shafts over 8 up to 10 mm: shaft keyway depth 1.8, hub 1.4 | STEP · STL |
| key-3x3x20 | key 3 × 3 × 20, form A (round ends) for shafts over 8 up to 10 mm: shaft keyway depth 1.8, hub 1.4 | STEP · STL |
| key-3x3x22 | key 3 × 3 × 22, form A (round ends) for shafts over 8 up to 10 mm: shaft keyway depth 1.8, hub 1.4 | STEP · STL |
| key-3x3x25 | key 3 × 3 × 25, form A (round ends) for shafts over 8 up to 10 mm: shaft keyway depth 1.8, hub 1.4 | STEP · STL |
| key-3x3x28 | key 3 × 3 × 28, form A (round ends) for shafts over 8 up to 10 mm: shaft keyway depth 1.8, hub 1.4 | STEP · STL |
| key-3x3x32 | key 3 × 3 × 32, form A (round ends) for shafts over 8 up to 10 mm: shaft keyway depth 1.8, hub 1.4 | STEP · STL |
| key-3x3x36 | key 3 × 3 × 36, form A (round ends) for shafts over 8 up to 10 mm: shaft keyway depth 1.8, hub 1.4 | STEP · STL |
| key-4x4x8 | key 4 × 4 × 8, form A (round ends) for shafts over 10 up to 12 mm: shaft keyway depth 2.5, hub 1.8 | STEP · STL |
| key-4x4x10 | key 4 × 4 × 10, form A (round ends) for shafts over 10 up to 12 mm: shaft keyway depth 2.5, hub 1.8 | STEP · STL |
| key-4x4x12 | key 4 × 4 × 12, form A (round ends) for shafts over 10 up to 12 mm: shaft keyway depth 2.5, hub 1.8 | STEP · STL |
| key-4x4x14 | key 4 × 4 × 14, form A (round ends) for shafts over 10 up to 12 mm: shaft keyway depth 2.5, hub 1.8 | STEP · STL |
| key-4x4x16 | key 4 × 4 × 16, form A (round ends) for shafts over 10 up to 12 mm: shaft keyway depth 2.5, hub 1.8 | STEP · STL |
| key-4x4x18 | key 4 × 4 × 18, form A (round ends) for shafts over 10 up to 12 mm: shaft keyway depth 2.5, hub 1.8 | STEP · STL |
| key-4x4x20 | key 4 × 4 × 20, form A (round ends) for shafts over 10 up to 12 mm: shaft keyway depth 2.5, hub 1.8 | STEP · STL |
| key-4x4x22 | key 4 × 4 × 22, form A (round ends) for shafts over 10 up to 12 mm: shaft keyway depth 2.5, hub 1.8 | STEP · STL |
| key-4x4x25 | key 4 × 4 × 25, form A (round ends) for shafts over 10 up to 12 mm: shaft keyway depth 2.5, hub 1.8 | STEP · STL |
| key-4x4x28 | key 4 × 4 × 28, form A (round ends) for shafts over 10 up to 12 mm: shaft keyway depth 2.5, hub 1.8 | STEP · STL |
| key-4x4x32 | key 4 × 4 × 32, form A (round ends) for shafts over 10 up to 12 mm: shaft keyway depth 2.5, hub 1.8 | STEP · STL |
| key-4x4x36 | key 4 × 4 × 36, form A (round ends) for shafts over 10 up to 12 mm: shaft keyway depth 2.5, hub 1.8 | STEP · STL |
| key-4x4x40 | key 4 × 4 × 40, form A (round ends) for shafts over 10 up to 12 mm: shaft keyway depth 2.5, hub 1.8 | STEP · STL |
| key-4x4x45 | key 4 × 4 × 45, form A (round ends) for shafts over 10 up to 12 mm: shaft keyway depth 2.5, hub 1.8 | STEP · STL |
| key-5x5x10 | key 5 × 5 × 10, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-5x5x12 | key 5 × 5 × 12, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-5x5x14 | key 5 × 5 × 14, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-5x5x16 | key 5 × 5 × 16, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-5x5x18 | key 5 × 5 × 18, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-5x5x20 | key 5 × 5 × 20, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-5x5x22 | key 5 × 5 × 22, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-5x5x25 | key 5 × 5 × 25, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-5x5x28 | key 5 × 5 × 28, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-5x5x32 | key 5 × 5 × 32, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-5x5x36 | key 5 × 5 × 36, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-5x5x40 | key 5 × 5 × 40, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-5x5x45 | key 5 × 5 × 45, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-5x5x50 | key 5 × 5 × 50, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-5x5x56 | key 5 × 5 × 56, form A (round ends) for shafts over 12 up to 17 mm: shaft keyway depth 3.0, hub 2.3 | STEP · STL |
| key-6x6x14 | key 6 × 6 × 14, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-6x6x16 | key 6 × 6 × 16, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-6x6x18 | key 6 × 6 × 18, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-6x6x20 | key 6 × 6 × 20, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-6x6x22 | key 6 × 6 × 22, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-6x6x25 | key 6 × 6 × 25, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-6x6x28 | key 6 × 6 × 28, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-6x6x32 | key 6 × 6 × 32, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-6x6x36 | key 6 × 6 × 36, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-6x6x40 | key 6 × 6 × 40, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-6x6x45 | key 6 × 6 × 45, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-6x6x50 | key 6 × 6 × 50, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-6x6x56 | key 6 × 6 × 56, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-6x6x63 | key 6 × 6 × 63, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-6x6x70 | key 6 × 6 × 70, form A (round ends) for shafts over 17 up to 22 mm: shaft keyway depth 3.5, hub 2.8 | STEP · STL |
| key-8x7x18 | key 8 × 7 × 18, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-8x7x20 | key 8 × 7 × 20, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-8x7x22 | key 8 × 7 × 22, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-8x7x25 | key 8 × 7 × 25, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-8x7x28 | key 8 × 7 × 28, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-8x7x32 | key 8 × 7 × 32, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-8x7x36 | key 8 × 7 × 36, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-8x7x40 | key 8 × 7 × 40, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-8x7x45 | key 8 × 7 × 45, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-8x7x50 | key 8 × 7 × 50, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-8x7x56 | key 8 × 7 × 56, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-8x7x63 | key 8 × 7 × 63, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-8x7x70 | key 8 × 7 × 70, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-8x7x80 | key 8 × 7 × 80, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-8x7x90 | key 8 × 7 × 90, form A (round ends) for shafts over 22 up to 30 mm: shaft keyway depth 4.0, hub 3.3 | STEP · STL |
| key-10x8x22 | key 10 × 8 × 22, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-10x8x25 | key 10 × 8 × 25, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-10x8x28 | key 10 × 8 × 28, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-10x8x32 | key 10 × 8 × 32, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-10x8x36 | key 10 × 8 × 36, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-10x8x40 | key 10 × 8 × 40, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-10x8x45 | key 10 × 8 × 45, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-10x8x50 | key 10 × 8 × 50, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-10x8x56 | key 10 × 8 × 56, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-10x8x63 | key 10 × 8 × 63, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-10x8x70 | key 10 × 8 × 70, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-10x8x80 | key 10 × 8 × 80, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-10x8x90 | key 10 × 8 × 90, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-10x8x100 | key 10 × 8 × 100, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-10x8x110 | key 10 × 8 × 110, form A (round ends) for shafts over 30 up to 38 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x28 | key 12 × 8 × 28, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x32 | key 12 × 8 × 32, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x36 | key 12 × 8 × 36, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x40 | key 12 × 8 × 40, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x45 | key 12 × 8 × 45, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x50 | key 12 × 8 × 50, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x56 | key 12 × 8 × 56, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x63 | key 12 × 8 × 63, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x70 | key 12 × 8 × 70, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x80 | key 12 × 8 × 80, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x90 | key 12 × 8 × 90, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x100 | key 12 × 8 × 100, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x110 | key 12 × 8 × 110, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x125 | key 12 × 8 × 125, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-12x8x140 | key 12 × 8 × 140, form A (round ends) for shafts over 38 up to 44 mm: shaft keyway depth 5.0, hub 3.3 | STEP · STL |
| key-14x9x36 | key 14 × 9 × 36, form A (round ends) for shafts over 44 up to 50 mm: shaft keyway depth 5.5, hub 3.8 | STEP · STL |
| key-14x9x40 | key 14 × 9 × 40, form A (round ends) for shafts over 44 up to 50 mm: shaft keyway depth 5.5, hub 3.8 | STEP · STL |
| key-14x9x45 | key 14 × 9 × 45, form A (round ends) for shafts over 44 up to 50 mm: shaft keyway depth 5.5, hub 3.8 | STEP · STL |
| key-14x9x50 | key 14 × 9 × 50, form A (round ends) for shafts over 44 up to 50 mm: shaft keyway depth 5.5, hub 3.8 | STEP · STL |
| key-14x9x56 | key 14 × 9 × 56, form A (round ends) for shafts over 44 up to 50 mm: shaft keyway depth 5.5, hub 3.8 | STEP · STL |
| key-14x9x63 | key 14 × 9 × 63, form A (round ends) for shafts over 44 up to 50 mm: shaft keyway depth 5.5, hub 3.8 | STEP · STL |
| key-14x9x70 | key 14 × 9 × 70, form A (round ends) for shafts over 44 up to 50 mm: shaft keyway depth 5.5, hub 3.8 | STEP · STL |
| key-14x9x80 | key 14 × 9 × 80, form A (round ends) for shafts over 44 up to 50 mm: shaft keyway depth 5.5, hub 3.8 | STEP · STL |
| key-14x9x90 | key 14 × 9 × 90, form A (round ends) for shafts over 44 up to 50 mm: shaft keyway depth 5.5, hub 3.8 | STEP · STL |
| key-14x9x100 | key 14 × 9 × 100, form A (round ends) for shafts over 44 up to 50 mm: shaft keyway depth 5.5, hub 3.8 | STEP · STL |
| key-14x9x110 | key 14 × 9 × 110, form A (round ends) for shafts over 44 up to 50 mm: shaft keyway depth 5.5, hub 3.8 | STEP · STL |
| key-14x9x125 | key 14 × 9 × 125, form A (round ends) for shafts over 44 up to 50 mm: shaft keyway depth 5.5, hub 3.8 | STEP · STL |
| key-14x9x140 | key 14 × 9 × 140, form A (round ends) for shafts over 44 up to 50 mm: shaft keyway depth 5.5, hub 3.8 | STEP · STL |
| key-14x9x160 | key 14 × 9 × 160, form A (round ends) for shafts over 44 up to 50 mm: shaft keyway depth 5.5, hub 3.8 | STEP · STL |
| key-16x10x45 | key 16 × 10 × 45, form A (round ends) for shafts over 50 up to 58 mm: shaft keyway depth 6.0, hub 4.3 | STEP · STL |
| key-16x10x50 | key 16 × 10 × 50, form A (round ends) for shafts over 50 up to 58 mm: shaft keyway depth 6.0, hub 4.3 | STEP · STL |
| key-16x10x56 | key 16 × 10 × 56, form A (round ends) for shafts over 50 up to 58 mm: shaft keyway depth 6.0, hub 4.3 | STEP · STL |
| key-16x10x63 | key 16 × 10 × 63, form A (round ends) for shafts over 50 up to 58 mm: shaft keyway depth 6.0, hub 4.3 | STEP · STL |
| key-16x10x70 | key 16 × 10 × 70, form A (round ends) for shafts over 50 up to 58 mm: shaft keyway depth 6.0, hub 4.3 | STEP · STL |
| key-16x10x80 | key 16 × 10 × 80, form A (round ends) for shafts over 50 up to 58 mm: shaft keyway depth 6.0, hub 4.3 | STEP · STL |
| key-16x10x90 | key 16 × 10 × 90, form A (round ends) for shafts over 50 up to 58 mm: shaft keyway depth 6.0, hub 4.3 | STEP · STL |
| key-16x10x100 | key 16 × 10 × 100, form A (round ends) for shafts over 50 up to 58 mm: shaft keyway depth 6.0, hub 4.3 | STEP · STL |
| key-16x10x110 | key 16 × 10 × 110, form A (round ends) for shafts over 50 up to 58 mm: shaft keyway depth 6.0, hub 4.3 | STEP · STL |
| key-16x10x125 | key 16 × 10 × 125, form A (round ends) for shafts over 50 up to 58 mm: shaft keyway depth 6.0, hub 4.3 | STEP · STL |
| key-16x10x140 | key 16 × 10 × 140, form A (round ends) for shafts over 50 up to 58 mm: shaft keyway depth 6.0, hub 4.3 | STEP · STL |
| key-16x10x160 | key 16 × 10 × 160, form A (round ends) for shafts over 50 up to 58 mm: shaft keyway depth 6.0, hub 4.3 | STEP · STL |
| key-16x10x180 | key 16 × 10 × 180, form A (round ends) for shafts over 50 up to 58 mm: shaft keyway depth 6.0, hub 4.3 | STEP · STL |
| key-18x11x50 | key 18 × 11 × 50, form A (round ends) for shafts over 58 up to 65 mm: shaft keyway depth 7.0, hub 4.4 | STEP · STL |
| key-18x11x56 | key 18 × 11 × 56, form A (round ends) for shafts over 58 up to 65 mm: shaft keyway depth 7.0, hub 4.4 | STEP · STL |
| key-18x11x63 | key 18 × 11 × 63, form A (round ends) for shafts over 58 up to 65 mm: shaft keyway depth 7.0, hub 4.4 | STEP · STL |
| key-18x11x70 | key 18 × 11 × 70, form A (round ends) for shafts over 58 up to 65 mm: shaft keyway depth 7.0, hub 4.4 | STEP · STL |
| key-18x11x80 | key 18 × 11 × 80, form A (round ends) for shafts over 58 up to 65 mm: shaft keyway depth 7.0, hub 4.4 | STEP · STL |
| key-18x11x90 | key 18 × 11 × 90, form A (round ends) for shafts over 58 up to 65 mm: shaft keyway depth 7.0, hub 4.4 | STEP · STL |
| key-18x11x100 | key 18 × 11 × 100, form A (round ends) for shafts over 58 up to 65 mm: shaft keyway depth 7.0, hub 4.4 | STEP · STL |
| key-18x11x110 | key 18 × 11 × 110, form A (round ends) for shafts over 58 up to 65 mm: shaft keyway depth 7.0, hub 4.4 | STEP · STL |
| key-18x11x125 | key 18 × 11 × 125, form A (round ends) for shafts over 58 up to 65 mm: shaft keyway depth 7.0, hub 4.4 | STEP · STL |
| key-18x11x140 | key 18 × 11 × 140, form A (round ends) for shafts over 58 up to 65 mm: shaft keyway depth 7.0, hub 4.4 | STEP · STL |
| key-18x11x160 | key 18 × 11 × 160, form A (round ends) for shafts over 58 up to 65 mm: shaft keyway depth 7.0, hub 4.4 | STEP · STL |
| key-18x11x180 | key 18 × 11 × 180, form A (round ends) for shafts over 58 up to 65 mm: shaft keyway depth 7.0, hub 4.4 | STEP · STL |
| key-18x11x200 | key 18 × 11 × 200, form A (round ends) for shafts over 58 up to 65 mm: shaft keyway depth 7.0, hub 4.4 | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=parallel-keys-din-6885

Fits with







Questions
Key for a 20 mm shaft?
6 × 6; keyway 3.5 deep in the shaft, 2.8 in the hub.