Library › Mechanisms › Couplings & joints ·

Peg clutch collar Ø16 × 8, Ø5 bore, Ø3 peg hole at 5.5 mm

What is a peg clutch collar? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: clutch collar, driving collar, collar de embrague de tetón, Mitnehmerring

Exact dimensions. True size, with no tolerance added.

length
16.0 mm
width
16.0 mm
height
8.0 mm

Notes

  • Ø16 × 8 collar fixed on the Ø5 shaft with a Ø3 axial hole 5.5 mm from the axis for a dowel peg that stands proud of its face; the sliding pulley's peg strikes it.
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Peg clutch collar Ø16 × 8, Ø5 bore, Ø3 peg hole at 5.5 mm size chart

dimensionvalue
collarØ16 × 8 mm
boreØ5
peg holeØ3 at r = 5.5

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 361: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
peg-clutch-collar-d16x8-b5collar, z 0..8, peg hole on +XSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=peg-clutch-collar-d16x8-b5

Peg clutch collar Ø16 × 8, Ø5 bore, Ø3 peg hole at 5.5 mm, isometric render of a generated part
Render of peg-clutch-collar-d16x8-b5 from the free STEP; not to scale.

Fits with

Questions

What is a peg clutch collar?

Ø16 × 8 collar fixed on the Ø5 shaft with a Ø3 axial hole 5.5 mm from the axis for a dowel peg that stands proud of its face; the sliding pulley's peg strikes it.