Library › Hardware › Mounting standards ·

17 mm ball joint for phone mounts (ball stud)

What size is the ball on a car phone mount? · Hardware · basis: The 17 mm ball is the de facto size of car and bike phone-holder ball joints, as named in maker listings (e.g. OOKWE's universal 17 mm ball head vent adapter) and community socket sets; no maker publishes the socket

Also called: 17mm ball mount, 17mm ball joint, phone holder ball size, car phone mount ball, 17mm ball step, 17mm ball stl, phone mount ball head

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
4 in table

Notes

  • Most clip-on car phone holders, vent clips, dashboard and suction bases join with a Ø17 mm ball on the base and a split socket with a screw collar on the phone head.
  • File: a ball stud with the Ø17.0 ball (the interface) on a Ø8 neck and a Ø20 × 4 foot. The neck and foot are my design, to union onto your own base (a clamp ring, a vent clip, a plate).
  • The socket side (its split, the collar thread and the cup depth) is not published by any maker I found and is not drawn. A socket is sized to grip Ø17.0.
  • This is not the 1 in (25.4) ball of RAM-style B-size mounts: see ram-mount-ball-sizes.

17 mm ball joint for phone mounts size chart

featuremmfrom
ballØ17.0maker listings (OOKWE), community socket sets
neckØ8my design
footØ20 × 4my design
socket, collar threadnot published—

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
ballØ17.0phone-head split socket with a screw collarsocketball-stud-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

OOKWE (listing by Walmart)Car air vent mount clip adapter, universal 17 mm ball headwebreference verify
MakerWorld (community)Ball joint socket set for phone mounts (17 mm), described as the industry-standard 17 mm ball systemSTL/3MFvaries per upload verify

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
ball-stud-1717 mm ball stud: Ø17.0 ball on a Ø8 neck (neck 6 clear below the ball) on a Ø20 × 4 foot; ball centre 17.500 above the foot face. Ball exact; neck and foot are my designSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=phone-mount-ball-17mm

17 mm ball joint for phone mounts (ball stud), isometric render of a generated part
Render of ball-stud-17 from the free STEP; not to scale.

You might also need

Questions

What size is the ball on a car phone holder?

17 mm on most clip-on and vent phone holders; the phone head's socket grips the Ø17 ball.

Is the 17 mm ball the same as a RAM ball?

No: RAM B-size balls are 1 in (25.4 mm). See ram-mount-ball-sizes.

Can I put a 17 mm ball on a bike bar?

Yes: union the stud onto a handlebar-clamp-rings ring for your bar Ø.