# Plate cam with knife-edge follower (simple harmonic rise)

> How does a plate cam with a knife-edge follower work?

- Category: Mechanisms › Cams
- Kind: Hardware
- Basis: Xem Studio design following Brown No. 136 (1868)
- Page: https://xemstudio.com/objects/plate-cam-knife-follower-mechanism/ · JSON: https://xemstudio.com/api/geometry?object=plate-cam-knife-follower-mechanism · Plain text: https://xemstudio.com/objects/plate-cam-knife-follower-mechanism/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files Xem Studio Design License (free to use and sell from, not to redistribute as files: https://xemstudio.com/license/)
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** True size, with no tolerance added.

## Notes

- Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, scales with k: base circle; stays the same: rise, law, pose.
- Resize: Scale base radius and lift together: the motion law and the pressure angle stay the same. Raising lift alone steepens the pressure angle and the follower can jam.
- Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.
- A disc cam turning on its shaft lifts a knife-edge follower that slides in a straight guide: the profile is drawn from the displacement law — here simple harmonic rise of 12 mm over 120°, dwell, return, dwell.
- Knife-edge: simplest, exact on any convex profile, but high wear; it is the follower of Brown's cam wheel (No. 136).
- Drawn at 60° of cam rotation (mid-rise, lift 6 mm) with the follower touching the profile; follower guide 30 × 16 block. Brown's No. 136.
- Parts (each has its own page): plate-cam-harmonic-knife-r20-h12, knife-edge-follower-8, follower-guide-block-8.
- Brown's movement No. 136 (1868) shows it; this model is a Xem Studio design following his figure, every part at true size.

## Sizes

| parameter | value |
|---|---|
| base circle | R20 |
| rise | 12 mm / 120° |
| law | simple harmonic |
| follower | knife-edge |
| pose | 60°, lift 6 mm |

## Where the files are

- Henry T. Brown (1868, public domain): [Five Hundred and Seven Mechanical Movements — scan on archive.org](https://archive.org/details/fivehundredseven00browiala) — web — Publisher's page; dimensions are facts
- 507movements.com: [Brown's movement No. 136: figure, his text and an animation](https://507movements.com/mm_136.html) — web — Publisher's page; dimensions are facts

## Free STEP/STL (1 parts, Xem Studio Design License, Xem Studio)

Index: https://xemstudio.com/files/hardware/plate-cam-knife-follower-mechanism/index.json · license: https://xemstudio.com/files/hardware/plate-cam-knife-follower-mechanism/LICENSE.md

- plate-cam-knife-follower-mechanism-assembly: [STEP](https://xemstudio.com/files/hardware/plate-cam-knife-follower-mechanism/plate-cam-knife-follower-mechanism-assembly.step) · [STL](https://xemstudio.com/files/hardware/plate-cam-knife-follower-mechanism/plate-cam-knife-follower-mechanism-assembly.stl) — Assembled mechanism, all parts placed at one pose (STEP keeps each part separate)

## Questions

**How does a plate cam with a knife-edge follower work?**

A disc cam turning on its shaft lifts a knife-edge follower that slides in a straight guide: the profile is drawn from the displacement law — here simple harmonic rise of 12 mm over 120°, dwell, return, dwell.

## Fits with

- [Plate cam, simple harmonic rise 12 mm, base circle R20, for a knife-edge follower](https://xemstudio.com/objects/plate-cam-harmonic-knife-r20-h12/)
- [Knife-edge cam follower, 8 × 6 mm, 60 long](https://xemstudio.com/objects/knife-edge-follower-8/)
- [Follower guide block 30 × 16 × 6 for an 8 mm wide follower](https://xemstudio.com/objects/follower-guide-block-8/)
