Plate cam with knife-edge follower (simple harmonic rise) — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/plate-cam-knife-follower-mechanism/ (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/) Basis: Xem Studio design following Brown No. 136 (1868) Catalog version: 2026-10-20 Sizes: see table below - Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, scales with k: base circle; stays the same: rise, law, pose. - Resize: Scale base radius and lift together: the motion law and the pressure angle stay the same. Raising lift alone steepens the pressure angle and the follower can jam. - Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up. - A disc cam turning on its shaft lifts a knife-edge follower that slides in a straight guide: the profile is drawn from the displacement law — here simple harmonic rise of 12 mm over 120°, dwell, return, dwell. - Knife-edge: simplest, exact on any convex profile, but high wear; it is the follower of Brown's cam wheel (No. 136). - Drawn at 60° of cam rotation (mid-rise, lift 6 mm) with the follower touching the profile; follower guide 30 × 16 block. Brown's No. 136. - Parts (each has its own page): plate-cam-harmonic-knife-r20-h12, knife-edge-follower-8, follower-guide-block-8. - Brown's movement No. 136 (1868) shows it; this model is a Xem Studio design following his figure, every part at true size. parameter value base circle R20 rise 12 mm / 120° law simple harmonic follower knife-edge pose 60°, lift 6 mm Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Henry T. Brown (1868, public domain): Five Hundred and Seven Mechanical Movements — scan on archive.org — web — Publisher's page; dimensions are facts — https://archive.org/details/fivehundredseven00browiala - 507movements.com: Brown's movement No. 136: figure, his text and an animation — web — Publisher's page; dimensions are facts — https://507movements.com/mm_136.html Free files (Xem Studio Design License, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/plate-cam-knife-follower-mechanism/index.json API: https://xemstudio.com/api/geometry?object=plate-cam-knife-follower-mechanism