# Printable tri-clamp (45°): 90° and 45° elbows, ½ to 4 in

> Can I 3D print tri-clamp elbows?

- Category: 3D printable tri-clamp › Clamps & fittings
- Kind: Hardware
- Basis: Xem Studio design: standard 2CMP / 2KMP centre-to-face and radius per size, 45° rims
- Page: https://xemstudio.com/objects/printable-tri-clamp-elbows/ · JSON: https://xemstudio.com/api/geometry?object=printable-tri-clamp-elbows · Plain text: https://xemstudio.com/objects/printable-tri-clamp-elbows/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files Xem Studio Design License (free to use and sell from, not to redistribute as files: https://xemstudio.com/license/)
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** True size, with no tolerance added.

## Notes

- 3D-printable tri-clamp: this is Xem Studio's print-friendly version of the standard sanitary fitting, drawn so it prints on an ordinary FDM or resin printer with no supports. Download the STL to print it, or the STEP to edit it. The files are true size (no printing allowance): add your own clearance in the slicer or CAD if your printer needs it.
- Same layout dimensions as the standard elbows, so they swap into a planned run.
- Printable tri-clamp: the ISO 2852 face and gasket groove are exactly standard, only the back cone behind each rim is 45° instead of 20°, so no rim overhangs more than 45° from vertical in any print orientation. Join these with the 45° clamps (printable-tri-clamp-clamps) and standard Type B gaskets; a 45° clamp fits only 45° rims, so keep a run all 45°. A 45° cone turns clamp force into face force at 1 : 1 (a 20° cone at 2.7 : 1), so tighten the clamp bolts harder or use M6.
- Print orientation: straight parts face down; elbows, tees and crosses with one face down; horizontal bores bridge their top, so keep them small or add a light tree support inside.
- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.

## Sizes

| size_in | c_to_f_90_mm | c_to_f_45_mm | radius_mm |
|---|---|---|---|
| ½ | 41.3 | 24.5 | 28.6 |
| ¾ | 41.3 | 24.5 | 28.6 |
| 1 | 50.8 | 28.6 | 38.1 |
| 1½ | 69.8 | 36.5 | 57.1 |
| 2 | 88.9 | 44.4 | 76.2 |
| 2½ | 107.9 | 52.4 | 95.2 |
| 3 | 127.0 | 60.3 | 114.3 |
| 4 | 168.3 | 79.4 | 152.4 |

## Where the files are

- GW Kent: [Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness](https://www.gwkent.com/triclamp-guide) — web — publisher's guide; dimensions cited
- Rubber Fab: [Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)](https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf) — PDF — maker chart; dimensions are facts (verify at link)

## Free STEP/STL (16 parts, Xem Studio Design License, Xem Studio)

Index: https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/index.json · license: https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/LICENSE.md

- elbow-90-45cone-0.5in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-0.5in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-0.5in.stl) — ½ in 90° elbow, 1.625 in centre to face
- elbow-45-45cone-0.5in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-0.5in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-0.5in.stl) — ½ in 45° elbow, 0.966 in centre to face
- elbow-90-45cone-0.75in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-0.75in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-0.75in.stl) — ¾ in 90° elbow, 1.625 in centre to face
- elbow-45-45cone-0.75in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-0.75in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-0.75in.stl) — ¾ in 45° elbow, 0.966 in centre to face
- elbow-90-45cone-1in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-1in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-1in.stl) — 1 in 90° elbow, 2.0 in centre to face
- elbow-45-45cone-1in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-1in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-1in.stl) — 1 in 45° elbow, 1.125 in centre to face
- elbow-90-45cone-1.5in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-1.5in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-1.5in.stl) — 1½ in 90° elbow, 2.75 in centre to face
- elbow-45-45cone-1.5in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-1.5in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-1.5in.stl) — 1½ in 45° elbow, 1.437 in centre to face
- elbow-90-45cone-2in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-2in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-2in.stl) — 2 in 90° elbow, 3.5 in centre to face
- elbow-45-45cone-2in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-2in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-2in.stl) — 2 in 45° elbow, 1.75 in centre to face
- elbow-90-45cone-2.5in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-2.5in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-2.5in.stl) — 2½ in 90° elbow, 4.25 in centre to face
- elbow-45-45cone-2.5in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-2.5in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-2.5in.stl) — 2½ in 45° elbow, 2.063 in centre to face
- elbow-90-45cone-3in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-3in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-3in.stl) — 3 in 90° elbow, 5.0 in centre to face
- elbow-45-45cone-3in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-3in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-3in.stl) — 3 in 45° elbow, 2.375 in centre to face
- elbow-90-45cone-4in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-4in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-90-45cone-4in.stl) — 4 in 90° elbow, 6.625 in centre to face
- elbow-45-45cone-4in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-4in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-elbows/elbow-45-45cone-4in.stl) — 4 in 45° elbow, 3.125 in centre to face

## Questions

**Can I 3D print this?**

Yes. It is the 3D-printable version: every overhang is 45° or steeper, so it prints without supports, and the sealing face is standard ISO 2852, so a normal gasket and clamp fit.

**Same size as a steel elbow?**

Yes: centre to face and bend radius are the standard values.

## Fits with

- [Printable tri-clamp (45°): ferrules, spools and caps, ½ to 4 in](https://xemstudio.com/objects/tri-clamp-45-degree-printable/)
- [Printable tri-clamp (45°): two-bolt clamps, ½ to 8 in](https://xemstudio.com/objects/printable-tri-clamp-clamps/)
- [Printable tri-clamp (45°): tees, short-outlet tees and crosses, ½ to 4 in](https://xemstudio.com/objects/printable-tri-clamp-tees-crosses/)
- [Printable tri-clamp (45°): concentric and eccentric reducers, ½ to 4 in](https://xemstudio.com/objects/printable-tri-clamp-reducers/)
- [Printable tri-clamp (45°): NPT male, NPT female and hose-barb adapters](https://xemstudio.com/objects/printable-tri-clamp-adapters/)
- [Printable tri-clamp (45°): dome lids and ported caps](https://xemstudio.com/objects/printable-tri-clamp-lids-caps/)
