# Printable tri-clamp (45°): dome lids and ported caps

> Can I 3D print a tri-clamp lid with ports?

- Category: 3D printable tri-clamp › Caps, lids & ports
- Kind: Hardware
- Basis: Xem Studio design: the dome lids and ported caps of the standard pages with 45° rims
- Page: https://xemstudio.com/objects/printable-tri-clamp-lids-caps/ · JSON: https://xemstudio.com/api/geometry?object=printable-tri-clamp-lids-caps · Plain text: https://xemstudio.com/objects/printable-tri-clamp-lids-caps/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files Xem Studio Design License (free to use and sell from, not to redistribute as files: https://xemstudio.com/license/)
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- 3D-printable tri-clamp: this is Xem Studio's print-friendly version of the standard sanitary fitting, drawn so it prints on an ordinary FDM or resin printer with no supports. Download the STL to print it, or the STEP to edit it. The files are true size (no printing allowance): add your own clearance in the slicer or CAD if your printer needs it.
- Lids print face down; the dome and ports grow up from the face.
- Printable tri-clamp: the ISO 2852 face and gasket groove are exactly standard, only the back cone behind each rim is 45° instead of 20°, so no rim overhangs more than 45° from vertical in any print orientation. Join these with the 45° clamps (printable-tri-clamp-clamps) and standard Type B gaskets; a 45° clamp fits only 45° rims, so keep a run all 45°. A 45° cone turns clamp force into face force at 1 : 1 (a 20° cone at 2.7 : 1), so tighten the clamp bolts harder or use M6.
- Print orientation: straight parts face down; elbows, tees and crosses with one face down; horizontal bores bridge their top, so keep them small or add a light tree support inside.
- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| clamp face | ISO 2852 face (flange C3 / groove C2): 1½ in 50.5 / 43.5; 2 in 64.0 / 56.5; 3 in 91.0 / 83.5; 4 in 119.0 / 110.0; 6 in 166.9 / 156.5; 8 in 217.7 / 207.0; rim 2.85; gasket groove 1.6 deep, R1.2 bottom, 23° walls; 45° back cone | standard Type B gasket and the 45° clamps (printable-tri-clamp-clamps): a 45° clamp fits only 45° rims, so keep a run all 45° | clamp | all |
| grommet hole | Ø12.7 | rubber grommet with a .500 in (12.7 mm) mounting hole (Heyco) | press | cap-45cone-1.5in-grommet-hole-12.7* |
| face to crown (dome lids) | 1½ in 18.5, 2 in 21.1, 3 in 26.2, 4 in 31.8, 6 in 38.9, 8 in 47.5 | height above the clamp face (keep-out above the lid) | designed | dome-lid-45cone-* |

## Sizes

| size_in | face_to_crown_mm |
|---|---|
| 1½ | 18.5 |
| 2 | 21.1 |
| 3 | 26.2 |
| 4 | 31.8 |
| 6 | 38.9 |
| 8 | 47.5 |

## Where the files are

- ASME: [B1.20.1 Pipe threads, general purpose (NPT): major diameter, L2, tap drill; B16.11 forged fittings (Class 3000 couplings); B36.10 Sch 40 bore](https://www.asme.org/codes-standards/find-codes-standards/b1-20-1-pipe-threads-general-purpose-inch) — standard — ASME; dimensions are facts (verify at link)
- GW Kent: [Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness](https://www.gwkent.com/triclamp-guide) — web — publisher's guide; dimensions cited
- Rubber Fab: [Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)](https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf) — PDF — maker chart; dimensions are facts (verify at link)

## Free STEP/STL (16 parts, Xem Studio Design License, Xem Studio)

Index: https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/index.json · license: https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/LICENSE.md

- dome-lid-45cone-1.5in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-1.5in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-1.5in.stl) — 1½ in dome lid, 18.5 face to crown
- dome-lid-45cone-2in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-2in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-2in.stl) — 2 in dome lid, 21.1 face to crown
- dome-lid-45cone-3in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-3in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-3in.stl) — 3 in dome lid, 26.2 face to crown
- dome-lid-45cone-4in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-4in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-4in.stl) — 4 in dome lid, 31.8 face to crown
- dome-lid-45cone-4in-1.5in-port: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-4in-1.5in-port.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-4in-1.5in-port.stl) — 4 in dome lid with a 1½ in clamp port
- dome-lid-45cone-6in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-6in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-6in.stl) — 6 in dome lid, 38.9 face to crown
- dome-lid-45cone-6in-1.5in-port: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-6in-1.5in-port.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-6in-1.5in-port.stl) — 6 in dome lid with a 1½ in clamp port
- dome-lid-45cone-8in: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-8in.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-8in.stl) — 8 in dome lid, 47.5 face to crown
- dome-lid-45cone-8in-1.5in-port: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-8in-1.5in-port.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-8in-1.5in-port.stl) — 8 in dome lid with a 1½ in clamp port
- cap-45cone-1.5in-1-4npt: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-1-4npt.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-1-4npt.stl) — 1–1½ in cap with 1 4npt
- cap-45cone-1.5in-1-2npt: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-1-2npt.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-1-2npt.stl) — 1–1½ in cap with 1 2npt
- cap-45cone-2in-1-2npt: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-2in-1-2npt.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-2in-1-2npt.stl) — 2 in cap with 1 2npt
- cap-45cone-1.5in-half-in-barb: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-half-in-barb.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-half-in-barb.stl) — 1–1½ in cap with half in barb
- cap-45cone-1.5in-grommet-hole-12.7: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-grommet-hole-12.7.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-grommet-hole-12.7.stl) — 1–1½ in cap with grommet hole 12.7
- cap-45cone-4in-1.5in-port: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-4in-1.5in-port.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-4in-1.5in-port.stl) — 4 in cap with 1.5in port
- cap-45cone-6in-1.5in-port: [STEP](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-6in-1.5in-port.step) · [STL](https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-6in-1.5in-port.stl) — 6 in cap with 1.5in port

## Questions

**Can I 3D print this?**

Yes. It is the 3D-printable version: every overhang is 45° or steeper, so it prints without supports, and the sealing face is standard ISO 2852, so a normal gasket and clamp fit.

**Dome or flat?**

The dome prints without support face down; a flat cap does too.

## Fits with

- [Printable tri-clamp (45°): ferrules, spools and caps, ½ to 4 in](https://xemstudio.com/objects/tri-clamp-45-degree-printable/)
- [Printable tri-clamp (45°): two-bolt clamps, ½ to 8 in](https://xemstudio.com/objects/printable-tri-clamp-clamps/)
- [Printable tri-clamp (45°): 90° and 45° elbows, ½ to 4 in](https://xemstudio.com/objects/printable-tri-clamp-elbows/)
- [Printable tri-clamp (45°): tees, short-outlet tees and crosses, ½ to 4 in](https://xemstudio.com/objects/printable-tri-clamp-tees-crosses/)
- [Printable tri-clamp (45°): concentric and eccentric reducers, ½ to 4 in](https://xemstudio.com/objects/printable-tri-clamp-reducers/)
- [Printable tri-clamp (45°): NPT male, NPT female and hose-barb adapters](https://xemstudio.com/objects/printable-tri-clamp-adapters/)
