Library › RC boats › Props and drive hardware ·

Raboesch M5 stern tube with ball bearing, shaft 290 mm (rb301-08)

What are the dimensions of the Raboesch M5 ball-bearing shaft 290 mm? · Modern device · basis: Secondary source: Lindinger (Raboesch distributor) (copy of the maker's figures; the maker publishes none directly)

Also called: raboesch rb301-08, raboesch m5 shaft 290, m5 stern tube ball bearing, 5mm prop shaft rc boat, rc boat stuffing tube 8mm, raboesch stevenrohr m5, stevenrohr kugellager m5, tubo de bocina m5, raboesch wellenanlage 290 mm

Exact dimensions. True size, with no tolerance added.

length
8 mm
width
8 mm
height
290 mm

Notes

  • A Raboesch ball-bearing stern tube for larger scale boats. The file models the Ø8 × 240 mm tube on a Ø5 × 290 mm shaft.
  • Figures are from Lindinger (Krick/Raboesch distributor), using Raboesch's lettered drawing dimensions.
  • True size, no printing tolerance added. Only published numbers are used; anything not published is said so.
  • Secondary source: the numbers come from a retailer or magazine copy of the maker's specification.

Raboesch M5 stern tube with ball bearing, shaft 290 mm size chart

dimensionvalue
Tube length (A)max 240 mm
Tube diameter (C)8 mm
Shaft diameter (D)5 mm
Shaft length (B)max 290 mm
Propeller thread (E)M5
Bearingsball bearing motor side, Delrin bush prop side
Manufacturer no.rb301-08

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Lindinger (Raboesch distributor)RABOESCH Shaft M5 ball bearing lg 290mmwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
raboesch-shaft-m5-ball-bearing-290mm-rb301-08-shaftShaft Ø5 × 290 mm (prop thread not modelled; overhang split not published)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=raboesch-shaft-m5-ball-bearing-290mm-rb301-08

Raboesch M5 stern tube with ball bearing, shaft 290 mm (rb301-08), isometric render of a generated part
Render of raboesch-shaft-m5-ball-bearing-290mm-rb301-08-shaft from the free STEP; not to scale.

Fits with

Questions

What prop thread does the Raboesch rb301-08 have?

M5, on a 5 mm shaft.