# Raspberry Pi 5

> What are the Raspberry Pi 5 board dimensions and mounting-hole positions?

- Category: Electronic components › Single-board computers · 2023
- Kind: Modern device
- Basis: published mechanical drawing
- Page: https://xemstudio.com/objects/raspberry-pi-5/ · JSON: https://xemstudio.com/api/geometry?object=raspberry-pi-5 · Plain text: https://xemstudio.com/objects/raspberry-pi-5/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

## Overall (mm)

| length | width |
|---|---|
| 85 | 56 |

Mounting holes: 4 × Ø2.7 mm, pattern 58 x 49, 3.5 from the long edge and 3.5 from the short edge mm, M2.5

**Exact dimensions.** True size, with no tolerance added.

## Notes

- Same hole pattern as Pi 2/3/4.
- Ports: 2x USB 3, 2x USB 2, Ethernet on one short edge; 2x micro-HDMI, USB-C power on one long edge; 40-pin header opposite.
- Active cooler and the official case use the same four holes.

## Where the files are

- Raspberry Pi Ltd (official): [Raspberry Pi 5 mechanical drawing (PDF)](https://datasheets.raspberrypi.com/rpi5/raspberry-pi-5-mechanical-drawing.pdf) — PDF — CC BY-SA 4.0 (Raspberry Pi documentation) (verify at link)
- Raspberry Pi Ltd (official): [Raspberry Pi documentation: mechanical drawings and STEP](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html) — PDF, STEP — CC BY-SA 4.0 (verify at link)

## Questions

**What are the Raspberry Pi 5 dimensions in mm?**

85 × 56 mm (length × width × height). Same hole pattern as Pi 2/3/4.

**What is the Raspberry Pi 5 mounting hole pattern?**

4 × Ø2.7 mm on a 58 x 49, 3.5 from the long edge and 3.5 from the short edge mm pattern, M2.5 screws.

**Where is the official CAD for the Raspberry Pi 5?**

Raspberry Pi Ltd (official): Raspberry Pi 5 mechanical drawing (PDF) (PDF, CC BY-SA 4.0 (Raspberry Pi documentation)). Linked from the sheet; Xem Studio does not rehost it.

## Fits with

- [Threaded standoffs, M2.5 and M3 (hex and round)](https://xemstudio.com/objects/threaded-standoffs-metric/)
- [40 mm axial fan](https://xemstudio.com/objects/40mm-fan/)
- [Raspberry Pi Camera Module 3](https://xemstudio.com/objects/raspberry-pi-camera-module-3/)
- [2.5-inch drive (SATA SSD / HDD)](https://xemstudio.com/objects/2-5-inch-drive/)
- [Raspberry Pi 4 Model B](https://xemstudio.com/objects/raspberry-pi-4-b/)
