Pawls for the Ø40 ratchet wheels: 12, 24 and 36 teeth — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/ratchet-pawl/ (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/) Basis: One pawl per wheel: Ø3 pivot 30 mm from the wheel axis, end face cut to lie on the steep face of a 3 mm tooth Catalog version: 2026-10-20 Sizes: see table below - A flat pawl 6 thick with a Ø8 boss on a Ø3 pivot. Its end face is cut to lie on the wheel's steep tooth face over 80 % of the 3 mm tooth depth, so it drives and locks through face contact, not a point that can skate off the tooth corner. - Set the pivot 30 mm from the wheel axis, 20° ahead of the tooth it drives (15° for the 36-tooth wheel). Checked: each pawl touches its wheel along the face with no overlap. - The sloped tooth backs lift it on the free stroke; a spring holds it down (not drawn). file wheel pivot from wheel axis pivot angle ahead pivot to nose thickness pawl-12t-d40 12 teeth 30 mm 20° 14.06 mm 6 mm pawl-24t-d40 24 teeth 30 mm 20° 14.39 mm 6 mm pawl-36t-d40 36 teeth 30 mm 15° 13.58 mm 6 mm Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Wikipedia: Ratchet (device) — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/Ratchet_(device) - Wikipedia: Pawl — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/Pawl - Long Earth Society: Engine builds that use these parts (videos and write-ups) — web, video — LES site — https://longearthsociety.com/engineering/ Free files (Xem Studio Design License, Xem Studio; STEP + STL, 3 parts): https://xemstudio.com/files/hardware/ratchet-pawl/index.json API: https://xemstudio.com/api/geometry?object=ratchet-pawl