Library › Car design › Car aero ·

RC buggy / off-road rear wing

Why are RC buggy wings so big and flat with tall side dams? · Standard part · basis: Design rules and figures from the cited sources; example geometry by Xem Studio

Also called: rc buggy wing, 1/10 buggy wing, rc off road wing, short course wing, buggy wing side dams, rc wing angle, high downforce buggy wing, 7 inch buggy wing, rc truck wing, 1/8 buggy wing, rc wing gurney lip

Exact dimensions. True size, with no tolerance added.

sizes
4 in table

Notes

  • Off-road RC wings are large, thin polycarbonate plates with tall side dams. EFRA lets a 1/10 off-road wing be 220 mm wide with its profile inside an 80 x 80 mm box, and any side dam inside 80 x 80 mm.
  • The wing adds rear traction, high-speed stability and control in the air; more rear wing gives a nose-up attitude on jumps (CompetitionX). Tall side dams are sold specifically to add side bite and centre dividers for straight-line stability (LiveRC).
  • Short-course trucks are covered by their own class rules; the fetched sources do not give their wing dimensions.
  • Used on: 1/10 2WD and 4WD off-road buggies.
  • The file is a reference example built by Xem Studio from the numbers above (EFRA 1/10 off-road maximum box; aoa illustrative.). Sizes the sources do not fix are illustrative; scale the example to your own vehicle.

RC buggy / off-road rear wing size chart

parametervalue or rangesource
1/10 off-road wingmax 220 mm wide; profile in 80 x 80 mm rectangleEFRA
Side damfit 80 x 80 mm rectangleEFRA
1/10 off-road overall widthmax 250 mmEFRA
Example aftermarket wing width7 in (178 mm)LiveRC

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

EFRAEFRA Handbook 2010, Appendix 3: Electric CarswebPublisher's page; dimensions are facts
LiveRCRevolution Design 7in ultra high downforce wingwebPublisher's page; dimensions are facts
CompetitionXRC Wings ExplainedwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
rc-buggy-wing-rear-wingsingle rear wing: span 220 × chord 80 mm at 6°, endplates 80 mm, inverted NACA 4412 section (mounts from below)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=rc-buggy-wing

RC buggy / off-road rear wing, isometric render of a generated part
Render of rc-buggy-wing-rear-wing from the free STEP; not to scale.

Fits with

Questions

Why does more wing change jumps?

Rear downforce and drag pitch the car nose-up in the air (CompetitionX).