Sanitary clamp crosses (9MP): ½ to 4 in — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/sanitary-clamp-crosses/ (sheet CC BY 4.0) Basis: ASME BPE / 3-A clamp-fitting dimensions published identically by Dixon and Steel & O'Brien; ISO 2852 face profile Catalog version: 2026-10-20 Sizes: see table below - A cross (9MP): a run with two opposite branches of the same size, four faces in all. Run face to face B, each branch centre to face A. - From ¾ in up the cross has the same run and branch lengths as the equal tee of that size; the ½ in cross is longer (114.3 run, 57.1 branch) than the ½ in tee. - Faces are the ISO 2852 profile: flat from the bore out to the flange OD with one gasket groove centred on the groove diameter (1.6 deep, bottom radius 1.2, walls 23°, edge radius 0.8, 4.01 wide at the face), 2.85 mm rim, 20° back cone, on the BPE flange diameters; the groove diameter is ISO 2852's C2 and the bead diameter of published gasket charts (4 in Ø110.0 from the chart); on ½ and ¾ in it is derived (Ø20.4, centred between the ¾ in bore and the flange OD). size_in run_face_to_face_mm branch_centre_to_face_mm ½ 114.3 57.1 ¾ 120.6 60.3 1 120.6 60.3 1½ 139.7 69.8 2 177.8 88.9 2½ 177.8 88.9 3 190.5 95.2 4 228.6 114.3 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - ASME: BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall) — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment - ISO (via iTeh sample): ISO 2852 clamp liners: face profile and flange / groove diameters — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf - Dixon Sanitary: Clamp elbows, ferrules: dimension sheet — PDF — publisher's catalogue; dimensions cited, nothing copied — https://dixonvalve.com/en/media/1397776 - Steel & O'Brien: Sanitary products catalog 2024 (clamp fittings dimension tables) — PDF — publisher's catalogue; dimensions cited, nothing copied — https://www.steelobrien.com/wp-content/uploads/2024/03/Sanitary-2024-FINAL.pdf - Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf Free files (CC BY 4.0, Xem Studio; STEP + STL, 8 parts): https://xemstudio.com/files/hardware/sanitary-clamp-crosses/index.json API: https://xemstudio.com/api/geometry?object=sanitary-clamp-crosses