# Two-bolt clamps for DIN 32676 flanges 34, 106, 155 and 183 mm

> What clamp fits a 34 mm DIN 32676 flange?

- Category: Tri-clamp & pipe › Clamp fittings
- Kind: Hardware
- Basis: Groove = the ISO 2852 rim's 20° back cone mirrored, as tri-clamp-clamps on this site; 50.5, 64, 91 and 119 mm flanges use those inch clamps
- Page: https://xemstudio.com/objects/sanitary-clamp-din-32676-clamps/ · JSON: https://xemstudio.com/api/geometry?object=sanitary-clamp-din-32676-clamps · Plain text: https://xemstudio.com/objects/sanitary-clamp-din-32676-clamps/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Only the metric-only flange sizes are here; the shared sizes are on the tri-clamp clamps page.
- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| clamp halves | metric-only flanges 34 / 106 / 155 / 183 | flange of the same Ø; shared sizes (50.5, 64, 91, 119) use the tri-clamp clamps | clamp | clamp-half-* |

## Sizes

| flange_mm | clamp_od_mm | width_mm |
|---|---|---|
| 34.0 | 43.0 | 18.8 |
| 106.0 | 115.0 | 18.8 |
| 155.0 | 164.0 | 20.6 |
| 183.0 | 192.0 | 21.7 |

## Where the files are

- DIN: [DIN 32676 clamp connections, series A on DIN 11850 tube (DN10–DN150): flange and bead per the Rubber Fab chart](https://www.din.de/en/getting-involved/standards-committees/nal/publications/wdc-beuth:din21:353366380) — standard — DIN; dimensions are facts (verify at link)
- Rubber Fab: [Tri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676)](https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf) — PDF — publisher's chart; dimensions cited, nothing copied
- Rubber Fab: [Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)](https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf) — PDF — maker chart; dimensions are facts (verify at link)

## Free STEP/STL (4 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-clamps/index.json

- clamp-half-34mm: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-clamps/clamp-half-34mm.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-clamps/clamp-half-34mm.stl) — two-bolt clamp half for the 34 mm flange (two per joint): 20° groove, contact after 0.4, 0.6 squeeze, M5 × 30 bolts
- clamp-half-106mm: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-clamps/clamp-half-106mm.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-clamps/clamp-half-106mm.stl) — two-bolt clamp half for the 106 mm flange (two per joint): 20° groove, contact after 0.4, 0.6 squeeze, M5 × 30 bolts
- clamp-half-155mm: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-clamps/clamp-half-155mm.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-clamps/clamp-half-155mm.stl) — two-bolt clamp half for the 155 mm flange (two per joint): 20° groove, contact after 0.4, 0.6 squeeze, M5 × 30 bolts
- clamp-half-183mm: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-clamps/clamp-half-183mm.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-clamps/clamp-half-183mm.stl) — two-bolt clamp half for the 183 mm flange (two per joint): 20° groove, contact after 0.4, 0.6 squeeze, M5 × 30 bolts

## Questions

**Which clamp for DN50?**

DN50 has the 64 mm flange: use the 2 in tri-clamp clamp.

## Fits with

- [DIN 32676 clamp ferrules, series A (metric), DN10 to DN150](https://xemstudio.com/objects/sanitary-clamp-din-32676-ferrules/)
- [Tri-clamp clamp, two-bolt: every flange size ½ to 4 in](https://xemstudio.com/objects/tri-clamp-clamps/)
