# DIN 32676 clamp gaskets (Type B profile), DN10 to DN150

> What gasket fits a DIN 32676 DN25 clamp?

- Category: Tri-clamp & pipe › Clamp fittings
- Kind: Standard part
- Basis: Bead diameter per the Rubber Fab chart; ISO 2852 Type B section; bore per DIN 11850 tube
- Page: https://xemstudio.com/objects/sanitary-clamp-din-32676-gaskets/ · JSON: https://xemstudio.com/api/geometry?object=sanitary-clamp-din-32676-gaskets · Plain text: https://xemstudio.com/objects/sanitary-clamp-din-32676-gaskets/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- The bead diameter follows the flange; the inner lip follows the tube, so a DN25 and a 1 in gasket share a flange but not a lip.
- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| gasket | bead Ø follows the flange, inner lip follows the tube (DN25 and 1 in share a flange, not a lip) | metric flange groove of the same size | designed | gasket-* |

## Sizes

| dn | od_mm | bead_mm | lip_id_mm |
|---|---|---|---|
| DN10 | 33.0 | 27.5 | 7.8 |
| DN15 | 33.0 | 27.5 | 13.8 |
| DN20 | 33.0 | 27.5 | 17.8 |
| DN25 | 49.5 | 43.5 | 23.8 |
| DN32 | 49.5 | 43.5 | 29.8 |
| DN40 | 49.5 | 43.5 | 35.8 |
| DN50 | 63.0 | 56.5 | 47.8 |
| DN65 | 90.0 | 83.5 | 63.8 |
| DN80 | 105.0 | 97.0 | 78.8 |
| DN100 | 118.0 | 110.0 | 97.8 |
| DN125 | 154.0 | 146.0 | 122.8 |
| DN150 | 182.0 | 174.0 | 147.8 |

## Where the files are

- Rubber Fab: [Tri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676)](https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf) — PDF — publisher's chart; dimensions cited, nothing copied
- DIN: [DIN 32676 clamp connections, series A on DIN 11850 tube (DN10–DN150): flange and bead per the Rubber Fab chart](https://www.din.de/en/getting-involved/standards-committees/nal/publications/wdc-beuth:din21:353366380) — standard — DIN; dimensions are facts (verify at link)
- Rubber Fab: [Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)](https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf) — PDF — maker chart; dimensions are facts (verify at link)

## Free STEP/STL (12 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/index.json

- gasket-dn10: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn10.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn10.stl) — DN10 gasket: OD 33, bead Ø27.5, lip ID 7.8
- gasket-dn15: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn15.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn15.stl) — DN15 gasket: OD 33, bead Ø27.5, lip ID 13.8
- gasket-dn20: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn20.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn20.stl) — DN20 gasket: OD 33, bead Ø27.5, lip ID 17.8
- gasket-dn25: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn25.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn25.stl) — DN25 gasket: OD 49.5, bead Ø43.5, lip ID 23.8
- gasket-dn32: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn32.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn32.stl) — DN32 gasket: OD 49.5, bead Ø43.5, lip ID 29.8
- gasket-dn40: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn40.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn40.stl) — DN40 gasket: OD 49.5, bead Ø43.5, lip ID 35.8
- gasket-dn50: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn50.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn50.stl) — DN50 gasket: OD 63, bead Ø56.5, lip ID 47.8
- gasket-dn65: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn65.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn65.stl) — DN65 gasket: OD 90, bead Ø83.5, lip ID 63.8
- gasket-dn80: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn80.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn80.stl) — DN80 gasket: OD 105, bead Ø97, lip ID 78.8
- gasket-dn100: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn100.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn100.stl) — DN100 gasket: OD 118, bead Ø110, lip ID 97.8
- gasket-dn125: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn125.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn125.stl) — DN125 gasket: OD 154, bead Ø146, lip ID 122.8
- gasket-dn150: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn150.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-din-32676-gaskets/gasket-dn150.stl) — DN150 gasket: OD 182, bead Ø174, lip ID 147.8

## Questions

**Can I use a 1½ in gasket on DN40?**

It seals on the same bead; its lip is 1.5 mm smaller than the DN40 bore, so it stands slightly into the flow.

## Fits with

- [DIN 32676 clamp ferrules, series A (metric), DN10 to DN150](https://xemstudio.com/objects/sanitary-clamp-din-32676-ferrules/)
- [Two-bolt clamps for DIN 32676 flanges 34, 106, 155 and 183 mm](https://xemstudio.com/objects/sanitary-clamp-din-32676-clamps/)
