Sanitary clamp elbows, 90° and 45°, ½ to 4 in (tri-clamp style, BPE) — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/sanitary-clamp-elbows/ (sheet CC BY 4.0) Basis: ASME BPE / 3-A clamp-fitting dimensions published identically by two manufacturers; ISO 2852 face profile; drawn by Xem Studio from those numbers Catalog version: 2026-10-20 Sizes: see table below - Clamp × clamp elbows: 90° (2CMP) and 45° (2KMP), both on the same centreline radius per size; a short straight sits between each face and the bend (0.5 in, 4 in: 0.625 in). - Centre to face is measured from the intersection of the two leg centrelines to the face; that is the number to lay out a run with. - ISO 2852 face: flat from the bore to the flange OD, gasket groove on C2 1.6 deep, bottom radius 1.2, walls 23°, edge radius 0.8; 2.85 mm rim, 20° back cone, on the BPE flange diameters ½–¾ in 25.0, 1–1½ in 50.5, 2 in 64.0, 2½ in 77.5, 3 in 91.0, 4 in 119.0 mm; tube OD 12.7 / 19.05 / 25.4 / 38.1 / 50.8 / 63.5 / 76.2 / 101.6 mm, wall 1.65 mm (4 in: 2.11). The gasket-groove diameter on ½ and ¾ in is derived (Ø20.4, centred between the ¾ in bore and the 25.0 flange so the groove fits); 4 in is Ø110.0 from the published gasket chart; the rest is from the standard. Type B gaskets: 1.7 web out to flange − 1, a bulge on each side on the groove diameter (5.5 overall), lip 1.1 inside the bore and 2.8 long; with the faces 1.7 apart each bulge is squeezed 0.3 into its groove (designed). size_in tube_od_mm flange_mm c_to_f_90_mm c_to_f_45_mm radius_mm ½ 12.7 25.0 41.3 24.5 28.6 ¾ 19.05 25.0 41.3 24.5 28.6 1 25.4 50.5 50.8 28.6 38.1 1½ 38.1 50.5 69.8 36.5 57.1 2 50.8 64.0 88.9 44.4 76.2 2½ 63.5 77.5 107.9 52.4 95.2 3 76.2 91.0 127.0 60.3 114.3 4 101.6 119.0 168.3 79.4 152.4 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - ASME: BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall) — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment - ISO (via iTeh sample): ISO 2852 clamp liners: face profile and flange / groove diameters — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf - Dixon Sanitary: Clamp elbows, ferrules: dimension sheet — PDF — publisher's catalogue; dimensions cited, nothing copied — https://dixonvalve.com/en/media/1397776 - Steel & O'Brien: Sanitary products catalog 2024 (clamp fittings dimension tables) — PDF — publisher's catalogue; dimensions cited, nothing copied — https://www.steelobrien.com/wp-content/uploads/2024/03/Sanitary-2024-FINAL.pdf - Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf Free files (CC BY 4.0, Xem Studio; STEP + STL, 16 parts): https://xemstudio.com/files/hardware/sanitary-clamp-elbows/index.json API: https://xemstudio.com/api/geometry?object=sanitary-clamp-elbows