Library › Tri-clamp & pipe › Clamp fittings ·

Sanitary clamp gaskets, 10 and 12 in (Type B profile)

What size is a 10 inch tri-clamp gasket? · Standard part · basis: ISO 2852 Type B gasket section (web 1.7, a bulge each side on the groove diameter, 5.5 overall, lip 1.1 into the bore and 2.8 long) on the 10 / 12 in tube and flange sizes

Also called: 10 inch tri clamp gasket, 12 inch tri clamp gasket, large tri clamp gasket dimensions

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
2 in table

Notes

  • The catalogues list 10 and 12 in gaskets without dimensions; this is the Type B section the site uses at every size, placed on the published bore and flange.
  • The gasket-groove diameter (C2) at 10 and 12 in is not in ISO 2852 (its table stops below these sizes): it is drawn at flange − 7.5 mm (the 2 in flange-to-groove difference, 64.0 − 56.5), and stated as derived. Everything else here is from the cited tables.

Sanitary clamp gaskets, 10 and 12 in size chart

size (in)od (mm)lip id (mm)bulge on dia (mm)overall (mm)web (mm)compressed (mm)
10267.48244.99260.985.51.72.1
12318.28295.79311.785.51.72.1

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
bulgeson the groove Ø (10 in Ø260.98, 12 in Ø311.78), 5.5 overall, web 1.7ferrule / cap gasket grooves (0.3 squeeze each)clampall
web1.7 to OD = flange − 1the two landsclampall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Steel & O'BrienSanitary products catalog 2024: 16AMP end caps 10 / 12 in (A 0.480, B 10.570 / 12.570 in); L14AM7 ferrules 1.500 in; clamp ratings 13MHHM, 13MHP, 13ASMEPDFpublisher's catalogue; dimensions cited, nothing copied
Holland Applied TechnologiesSanitary tri-clamp fittings: EG14AM7 ferrules 8 / 10 / 12 in (1.500, bore 9.732 / 11.732 in, tube 10.000 / 12.000 in); EG16A caps (10.570 / 12.570 in)PDFpublisher's catalogue; dimensions cited, nothing copied
Shaw Stainless & AlloySanitary clamp data sheet: EG14AM7 ferrules (bore 9.732 / 11.732 in), EG16A caps 10.570 / 12.570 in, 13MHHM ratingsPDFpublisher's data sheet; dimensions cited, nothing copied
ISO (via iTeh sample)ISO 2852 clamp liners: face profile (2.85 rim, flat face with the gasket groove: K 1.6, R3 1.2, 23°, P2 0.8; 20° back) and Type B gasketPDFstandard excerpt; dimensions are facts

Free files

★ Free files 2 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
gasket-10in10 in Type B gasket (ISO 2852 profile): OD 267.48, lip ID 244.99 × 2.8 long, web 1.7 with a bulge each side on Ø260.98 (5.5 overall)STEP · STL
gasket-12in12 in Type B gasket (ISO 2852 profile): OD 318.28, lip ID 295.79 × 2.8 long, web 1.7 with a bulge each side on Ø311.78 (5.5 overall)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=sanitary-clamp-gaskets-10-12in

Sanitary clamp gaskets, 10 and 12 in (Type B profile), isometric render of a generated part
Render of gasket-12in from the free STEP; not to scale.

Fits with

Questions

What is the OD of a 10 in tri-clamp gasket?

267.5 mm (flange − 1); lip ID 245.0 mm.