# Sanitary clamp tees and short-outlet tees (7MP, 7MPS): ½ to 4 in

> What are the dimensions of a 2 inch tri-clamp tee?

- Category: Tri-clamp & pipe › Clamp fittings
- Kind: Standard part
- Basis: ASME BPE / 3-A clamp-fitting dimensions published identically by Dixon and Steel & O'Brien; ISO 2852 face profile
- Page: https://xemstudio.com/objects/sanitary-clamp-tees/ · JSON: https://xemstudio.com/api/geometry?object=sanitary-clamp-tees · Plain text: https://xemstudio.com/objects/sanitary-clamp-tees/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Equal tee (7MP): a run with a face at each end and one branch of the same size at 90°. Run face to face B, branch centre to face A.
- Short-outlet tee (7MPS): the same run with a branch only as long as its flange needs, for a gauge, probe or valve right at the line; 1 to 4 in.
- Faces are the ISO 2852 profile: flat from the bore out to the flange OD with one gasket groove centred on the groove diameter (1.6 deep, bottom radius 1.2, walls 23°, edge radius 0.8, 4.01 wide at the face), 2.85 mm rim, 20° back cone, on the BPE flange diameters; the groove diameter is ISO 2852's C2 and the bead diameter of published gasket charts (4 in Ø110.0 from the chart); on ½ and ¾ in it is derived (Ø20.4, centred between the ¾ in bore and the flange OD).

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| clamp faces | ISO 2852 / BPE flange | clamp + Type B gasket to any fitting of the same size | clamp | all |

## Sizes

| size_in | run_face_to_face_mm | branch_centre_to_face_mm | short_branch_centre_to_face_mm |
|---|---|---|---|
| ½ | 63.5 | 31.8 | — |
| ¾ | 120.6 | 60.3 | — |
| 1 | 120.6 | 60.3 | 28.6 |
| 1½ | 139.7 | 69.8 | 34.9 |
| 2 | 177.8 | 88.9 | 41.3 |
| 2½ | 177.8 | 88.9 | 47.6 |
| 3 | 190.5 | 95.2 | 54.0 |
| 4 | 228.6 | 114.3 | 69.8 |

## Where the files are

- ASME: [BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall)](https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment) — standard — ASME; dimensions are facts (verify at link)
- ISO (via iTeh sample): [ISO 2852 clamp liners: face profile and flange / groove diameters](https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf) — PDF — standard excerpt; dimensions are facts
- Dixon Sanitary: [Clamp elbows, ferrules: dimension sheet](https://dixonvalve.com/en/media/1397776) — PDF — publisher's catalogue; dimensions cited, nothing copied
- Steel & O'Brien: [Sanitary products catalog 2024 (clamp fittings dimension tables)](https://www.steelobrien.com/wp-content/uploads/2024/03/Sanitary-2024-FINAL.pdf) — PDF — publisher's catalogue; dimensions cited, nothing copied
- Rubber Fab: [Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)](https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf) — PDF — maker chart; dimensions are facts (verify at link)

## Free STEP/STL (14 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/sanitary-clamp-tees/index.json

- tee-0.5in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-0.5in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-0.5in.stl) — ½ in equal tee (7MP): run 2.5 in face to face, branch 1.25 in centre to face
- tee-0.75in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-0.75in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-0.75in.stl) — ¾ in equal tee (7MP): run 4.75 in face to face, branch 2.375 in centre to face
- tee-1in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-1in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-1in.stl) — 1 in equal tee (7MP): run 4.75 in face to face, branch 2.375 in centre to face
- tee-short-1in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-1in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-1in.stl) — 1 in short-outlet tee (7MPS): run 4.75 in, branch 1.125 in centre to face
- tee-1.5in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-1.5in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-1.5in.stl) — 1½ in equal tee (7MP): run 5.5 in face to face, branch 2.75 in centre to face
- tee-short-1.5in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-1.5in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-1.5in.stl) — 1½ in short-outlet tee (7MPS): run 5.5 in, branch 1.375 in centre to face
- tee-2in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-2in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-2in.stl) — 2 in equal tee (7MP): run 7.0 in face to face, branch 3.5 in centre to face
- tee-short-2in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-2in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-2in.stl) — 2 in short-outlet tee (7MPS): run 7.0 in, branch 1.625 in centre to face
- tee-2.5in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-2.5in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-2.5in.stl) — 2½ in equal tee (7MP): run 7.0 in face to face, branch 3.5 in centre to face
- tee-short-2.5in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-2.5in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-2.5in.stl) — 2½ in short-outlet tee (7MPS): run 7.0 in, branch 1.875 in centre to face
- tee-3in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-3in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-3in.stl) — 3 in equal tee (7MP): run 7.5 in face to face, branch 3.75 in centre to face
- tee-short-3in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-3in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-3in.stl) — 3 in short-outlet tee (7MPS): run 7.5 in, branch 2.125 in centre to face
- tee-4in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-4in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-4in.stl) — 4 in equal tee (7MP): run 9.0 in face to face, branch 4.5 in centre to face
- tee-short-4in: [STEP](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-4in.step) · [STL](https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-4in.stl) — 4 in short-outlet tee (7MPS): run 9.0 in, branch 2.75 in centre to face

## How it fits

### Connects to
- [Sanitary clamp spools: 3, 6 and 12 in, ½ to 4 in](https://xemstudio.com/objects/sanitary-clamp-spools/): spools on each face
- [Sanitary clamp end caps (16AMP): ½ to 4 in](https://xemstudio.com/objects/sanitary-clamp-end-caps/): cap an unused branch

### Alternatives
- [Sanitary clamp crosses (9MP): ½ to 4 in](https://xemstudio.com/objects/sanitary-clamp-crosses/): two opposite branches
- [Sanitary clamp header manifolds: 1½, 2 and 3 in headers with 3 to 5 outlets (tri-clamp style)](https://xemstudio.com/objects/sanitary-clamp-manifolds/): several outlets on one header

### Also needed
- [Tri-clamp clamp, two-bolt: every flange size ½ to 4 in](https://xemstudio.com/objects/tri-clamp-clamps/): clamp and gasket per face

## Questions

**How long is a 2 inch sanitary clamp tee?**

177.8 mm (7.0 in) face to face on the run, 88.9 mm (3.5 in) centre to branch face.

**What is a short-outlet tee?**

A tee whose branch is only as long as its flange needs: 41.3 mm (1.625 in) centre to face on 2 in, against 88.9 for the equal tee.

## Fits with

- [Sanitary clamp crosses (9MP): ½ to 4 in](https://xemstudio.com/objects/sanitary-clamp-crosses/)
- [Sanitary clamp elbows, 90° and 45°, ½ to 4 in (tri-clamp style, BPE)](https://xemstudio.com/objects/sanitary-clamp-elbows/)
- [Sanitary clamp end caps (16AMP): ½ to 4 in](https://xemstudio.com/objects/sanitary-clamp-end-caps/)
- [Sanitary clamp header manifolds: 1½, 2 and 3 in headers with 3 to 5 outlets (tri-clamp style)](https://xemstudio.com/objects/sanitary-clamp-manifolds/)
- [Tri-clamp clamp, two-bolt: every flange size ½ to 4 in](https://xemstudio.com/objects/tri-clamp-clamps/)
