# Seeed Studio XIAO ESP32S3 — board outline, castellated pads and USB-C position

> What are the Seeed Studio XIAO ESP32S3 dimensions and where is the USB-C port?

- Category: Electronic components › Microcontroller boards
- Kind: Modern device
- Basis: Seeed Studio's XIAO ESP32S3 v1.1 dimensioning DXF (board outline and USB-C footprint) and the Seeed wiki.
- Page: https://xemstudio.com/objects/seeed-xiao-esp32s3/ · JSON: https://xemstudio.com/api/geometry?object=seeed-xiao-esp32s3 · Plain text: https://xemstudio.com/objects/seeed-xiao-esp32s3/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

## Overall (mm)

| length | width | height |
|---|---|---|
| 21.14 | 17.78 | 4.26 |

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Exact nominal dimensions. PCB 17.78 × 21.135 × 1.0 mm, all four corners R1.905; datum is the board centre, bottom on z=0; USB-C on the +Y short edge.
- No mounting holes: the board is held by 14 castellated edge pads, 7 per long edge, 2.54 mm pitch.
- USB-C receptacle 8.94 mm wide (x −4.47…+4.47), 7.35 mm deep, front flush with the +Y edge, top 4.26 mm above the board bottom.
- Base board only. The Sense camera expansion board stacks on the same 17.78 × 21.135 outline and is not modelled.
- Not modelled: ESP32-S3 shield can, U.FL antenna connector, buttons, LEDs and bottom battery/JTAG pads.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| castellated edge pads | 2 × 7 pads, 2.54 pitch, on the 17.78 mm-apart long edges | carrier PCB pads or 2.54 mm pin headers | designed | all |
| USB-C port | 8.94 wide, top 4.26 above board bottom, flush with the +Y edge | USB-C cable opening in the case end wall | designed | all |

## Where the files are

- Seeed Studio: [XIAO ESP32S3 getting started (specifications and dimension DXF)](https://wiki.seeedstudio.com/xiao_esp32s3_getting_started) — web — Publisher's page; dimensions are facts
- The Pi Hut: [Seeed Studio XIAO ESP32S3](https://thepihut.com/products/seeed-studio-xiao-esp32s3) — web — Publisher's page; dimensions are facts

## Free STEP/STL (1 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/seeed-xiao-esp32s3/index.json

- seeed-xiao-esp32s3: [STEP](https://xemstudio.com/files/hardware/seeed-xiao-esp32s3/seeed-xiao-esp32s3.step) · [STL](https://xemstudio.com/files/hardware/seeed-xiao-esp32s3/seeed-xiao-esp32s3.stl) — Seeed Studio XIAO ESP32S3 — board outline, castellated pads and USB-C position

## Questions

**How big is the XIAO ESP32S3?**

21.135 × 17.78 mm, 1.0 mm PCB, R1.905 corners; 4.26 mm tall at the USB-C port.

**Does the XIAO ESP32S3 have mounting holes?**

No. It mounts by its 14 castellated pads (7 per side, 2.54 mm pitch) or soldered pin headers.

**Is the XIAO ESP32S3 Sense the same size?**

The Sense uses this base board with a camera expansion board stacked on the same 21.135 × 17.78 mm outline.

## Fits with

- [Seeed Studio XIAO (all variants)](https://xemstudio.com/objects/seeed-xiao/)
- [Seeed Studio XIAO ESP32C3](https://xemstudio.com/objects/seeed-xiao-esp32c3/)
- [Seeed Studio XIAO RP2040](https://xemstudio.com/objects/seeed-xiao-rp2040/)
- [Seeed Studio XIAO nRF52840](https://xemstudio.com/objects/seeed-xiao-nrf52840/)
- [2.54 mm pin headers, 1×2 to 2×20, vertical and right-angle](https://xemstudio.com/objects/pin-headers-2.54mm/)
- [USB-C receptacle (16/24-pin, mid-mount)](https://xemstudio.com/objects/usb-c-receptacle/)
