Seeed Studio XIAO ESP32S3 — board outline, castellated pads and USB-C position — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/seeed-xiao-esp32s3/ (sheet CC BY 4.0) Basis: Seeed Studio's XIAO ESP32S3 v1.1 dimensioning DXF (board outline and USB-C footprint) and the Seeed wiki. Catalog version: 2026-10-20 Overall (mm): length 21.14, width 17.78, height 4.26 - Exact nominal dimensions. PCB 17.78 × 21.135 × 1.0 mm, all four corners R1.905; datum is the board centre, bottom on z=0; USB-C on the +Y short edge. - No mounting holes: the board is held by 14 castellated edge pads, 7 per long edge, 2.54 mm pitch. - USB-C receptacle 8.94 mm wide (x −4.47…+4.47), 7.35 mm deep, front flush with the +Y edge, top 4.26 mm above the board bottom. - Base board only. The Sense camera expansion board stacks on the same 17.78 × 21.135 outline and is not modelled. - Not modelled: ESP32-S3 shield can, U.FL antenna connector, buttons, LEDs and bottom battery/JTAG pads. Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Seeed Studio: XIAO ESP32S3 getting started (specifications and dimension DXF) — web — Publisher's page; dimensions are facts — https://wiki.seeedstudio.com/xiao_esp32s3_getting_started - The Pi Hut: Seeed Studio XIAO ESP32S3 — web — Publisher's page; dimensions are facts — https://thepihut.com/products/seeed-studio-xiao-esp32s3 Free files (CC BY 4.0, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/seeed-xiao-esp32s3/index.json API: https://xemstudio.com/api/geometry?object=seeed-xiao-esp32s3