Library › Hardware › Furniture & cabinet hardware ·

Shelf support pins for 5 mm holes (32 mm system), plain and L-ledge

What size shelf pins fit IKEA BILLY? · Hardware · basis: 32 mm system 5 mm holes; Häfele 5 mm shelf supports; BILLY pitch from owner reports

Also called: billy shelf pins, 5mm shelf pins, shelf support pins replacement

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
4 in table

Notes

  • 5 mm holes on a 32 mm vertical pitch are the cabinet-industry standard and what BILLY owners report.
  • Print pins standing up for round pins; the L-ledge prints on its side.

Shelf support pins for 5 mm holes (32 mm system), plain and L-ledge size chart

pindia (mm)length (mm)
plain516
plain520
L-ledge58
small-hole variant3.216

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
pinØ5 × 16 / 20 plain; L-ledge Ø5 × 8Ø5 shelf-pin hole in the 32 mm system: 32 mm pitch, column 37 mm from the front edge, hole depth 12–14 (single source)slideshelf-pin-5*
small pinØ3.2 × 16Ø3.2 holeslideshelf-pin-3*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

HäfeleShelf supports for 5 mm holeswebPublisher's page; dimensions are facts
Hausbau-Forum (owner report)BILLY: 5 mm holes, 32 mm pitchwebPublisher's page; dimensions are facts

Free files

★ Free files 4 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
shelf-pin-5x16-plainPlain Ø5 × 16 mm shelf pin (8 in the hole, 8 under the shelf)STEP · STL
shelf-pin-5x20-plainPlain Ø5 × 20 mm shelf pinSTEP · STL
shelf-pin-5-l-ledgeØ5 pin with a 10 × 12 ledge (prints on its side; the shelf rests on the ledge)STEP · STL
shelf-pin-3-plainØ3.2 × 16 pin for the small-hole bookcase variantSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=shelf-pins-5mm

Shelf support pins for 5 mm holes (32 mm system), plain and L-ledge, isometric render of a generated part
Render of shelf-pin-5-l-ledge from the free STEP; not to scale.

Fits with

Questions

What size are BILLY shelf pins?

Ø5 mm, in holes on a 32 mm pitch.