# 3D printable snap-fit hooks and catches: cantilever latch, permanent or releasable, 4 sizes (STL, STEP)

> What size should a 3D printed snap-fit hook be, and is there a ready hook and catch I can drop into my design?

- Category: 3D printing › Snap fits & clips
- Kind: Hardware
- Basis: Straight cantilever snap fit per the Bayer snap-fit design guide: peak strain ε = 1.5·t·y/L². Xem design, zero clearance.
- Page: https://xemstudio.com/objects/snap-fit-hooks-and-catches/ · JSON: https://xemstudio.com/api/geometry?object=snap-fit-hooks-and-catches · Plain text: https://xemstudio.com/objects/snap-fit-hooks-and-catches/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files Xem Studio Design License (free to use and sell from, not to redistribute as files: https://xemstudio.com/license/)
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

## Overall (mm)

| length | width | height |
|---|---|---|
| 13.4 | 16.0 | 40.057 |

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Strain at full deflection: S 1.4 %, M 1.3 %, L 1.2 %, XL 1.2 %, under the ~2 % limit for PLA/PETG.
- Permanent hooks have a 90° back face; releasable hooks a 45° back face. Lead-in 30° from vertical on all.
- The catch ledge top sits at z = L with its edge at x = t: place the catch so it touches the hook beam.
- Print the hook on its side so the beam bends within the layers. Add 0.1–0.2 mm clearance on the catch edge for FDM.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| hook head (undercut y) | S 0.8 / M 1.2 / L 1.6 / XL 2.4 mm | matching snap catch or a ledge in your part | slide | all |
| base plate | 3 mm thick, w + 4 wide | glue, screw or merge into your part | designed | hooks* |

## Sizes

| file | L × t × w mm | undercut y mm | overall mm |
|---|---|---|---|
| snap-hook-s-permanent | 10 × 1.2 × 6 | 0.8 | 10 × 10 × 14.886 |
| snap-hook-s-releasable | 10 × 1.2 × 6 | 0.8 | 10 × 10 × 15.686 |
| snap-catch-s | 10 × 1.2 × 6 | catch | 12 × 10 × 10 |
| snap-hook-m-permanent | 15 × 1.6 × 8 | 1.2 | 10.8 × 12 × 20.578 |
| snap-hook-m-releasable | 15 × 1.6 × 8 | 1.2 | 10.8 × 12 × 21.778 |
| snap-catch-m | 15 × 1.6 × 8 | catch | 12 × 12 × 15 |
| snap-hook-l-permanent | 20 × 2.0 × 10 | 1.6 | 11.6 × 14 × 26.271 |
| snap-hook-l-releasable | 20 × 2.0 × 10 | 1.6 | 11.6 × 14 × 27.871 |
| snap-catch-l | 20 × 2.0 × 10 | catch | 12 × 14 × 20 |
| snap-hook-xl-permanent | 30 × 3.0 × 12 | 2.4 | 13.4 × 16 × 37.657 |
| snap-hook-xl-releasable | 30 × 3.0 × 12 | 2.4 | 13.4 × 16 × 40.057 |
| snap-catch-xl | 30 × 3.0 × 12 | catch | 12 × 16 × 30 |

## Where the files are

- Bayer MaterialScience: [Snap-Fit Joints for Plastics: A Design Guide](https://fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf) — web — Publisher's page; dimensions are facts
- Fictiv: [How to Design Snap Fit Components](https://www.fictiv.com/articles/how-to-design-snap-fit-components) — web — Publisher's page; dimensions are facts

## Free STEP/STL (12 parts, Xem Studio Design License, Xem Studio)

Index: https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/index.json · license: https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/LICENSE.md

- snap-hook-s-permanent: [STEP](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-s-permanent.step) · [STL](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-s-permanent.stl) — Snap-fit hook, small: beam 10 mm long × 1.2 mm thick × 6 mm wide, 0.8 mm undercut, permanent (90° back face, locks for good), 30° lead-in, 3 mm base plate
- snap-hook-s-releasable: [STEP](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-s-releasable.step) · [STL](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-s-releasable.stl) — Snap-fit hook, small: beam 10 mm long × 1.2 mm thick × 6 mm wide, 0.8 mm undercut, releasable (45° back face, pulls apart), 30° lead-in, 3 mm base plate
- snap-catch-s: [STEP](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-s.step) · [STL](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-s.stl) — Catch for the small hook: ledge top at 10 mm, edge flush with the hook beam (zero clearance), 10 mm wide
- snap-hook-m-permanent: [STEP](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-m-permanent.step) · [STL](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-m-permanent.stl) — Snap-fit hook, medium: beam 15 mm long × 1.6 mm thick × 8 mm wide, 1.2 mm undercut, permanent (90° back face, locks for good), 30° lead-in, 3 mm base plate
- snap-hook-m-releasable: [STEP](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-m-releasable.step) · [STL](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-m-releasable.stl) — Snap-fit hook, medium: beam 15 mm long × 1.6 mm thick × 8 mm wide, 1.2 mm undercut, releasable (45° back face, pulls apart), 30° lead-in, 3 mm base plate
- snap-catch-m: [STEP](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-m.step) · [STL](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-m.stl) — Catch for the medium hook: ledge top at 15 mm, edge flush with the hook beam (zero clearance), 12 mm wide
- snap-hook-l-permanent: [STEP](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-l-permanent.step) · [STL](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-l-permanent.stl) — Snap-fit hook, large: beam 20 mm long × 2.0 mm thick × 10 mm wide, 1.6 mm undercut, permanent (90° back face, locks for good), 30° lead-in, 3 mm base plate
- snap-hook-l-releasable: [STEP](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-l-releasable.step) · [STL](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-l-releasable.stl) — Snap-fit hook, large: beam 20 mm long × 2.0 mm thick × 10 mm wide, 1.6 mm undercut, releasable (45° back face, pulls apart), 30° lead-in, 3 mm base plate
- snap-catch-l: [STEP](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-l.step) · [STL](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-l.stl) — Catch for the large hook: ledge top at 20 mm, edge flush with the hook beam (zero clearance), 14 mm wide
- snap-hook-xl-permanent: [STEP](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-xl-permanent.step) · [STL](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-xl-permanent.stl) — Snap-fit hook, extra large: beam 30 mm long × 3.0 mm thick × 12 mm wide, 2.4 mm undercut, permanent (90° back face, locks for good), 30° lead-in, 3 mm base plate
- snap-hook-xl-releasable: [STEP](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-xl-releasable.step) · [STL](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-xl-releasable.stl) — Snap-fit hook, extra large: beam 30 mm long × 3.0 mm thick × 12 mm wide, 2.4 mm undercut, releasable (45° back face, pulls apart), 30° lead-in, 3 mm base plate
- snap-catch-xl: [STEP](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-xl.step) · [STL](https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-xl.stl) — Catch for the extra large hook: ledge top at 30 mm, edge flush with the hook beam (zero clearance), 16 mm wide

## Questions

**How big should a snap-fit undercut be for 3D printing?**

Size it from the strain: ε = 1.5·t·y/L² for a straight beam. Keep ε under about 2% for PLA and PETG; these hooks sit at 1.2–1.4%.

**Permanent or releasable snap fit?**

Permanent has a 90° back face and will not pull out; releasable has a 45° back face and lets go under a firm pull.

**Which way should I print a snap hook?**

Lay the beam so it bends across the layers, not between them: print the hook on its side, beam flat on the bed, for the strongest flex.

**How much clearance does a printed snap fit need?**

These are zero clearance. Add about 0.1–0.2 mm on the catch edge for FDM.

**Can I resize the hook?**

Scale L, t and y together so 1.5·t·y/L² stays under 2%, and keep t at least 2–3 nozzle widths.

## Fits with

- [Snap-fit cantilever joint (hook and catch)](https://xemstudio.com/objects/snap-fit-cantilever-joint/)
- [Living hinge (flexure hinge)](https://xemstudio.com/objects/living-hinge/)
- [Print-in-place: push button with flexure return and click](https://xemstudio.com/objects/print-in-place-push-button-flexure/)
- [3D printable annular snap-fit caps and containers: push-on lid with bead and groove, 20–50 mm (STL, STEP)](https://xemstudio.com/objects/annular-snap-fit-caps/)
- [3D printable side-release buckles for 20, 25 and 38 mm webbing: plug and socket (STL, STEP)](https://xemstudio.com/objects/side-release-buckles/)
