Library › Hardware › Mounting standards ·

Snowboard binding insert patterns: 4x4, 2x4, 3D and Channel

What is the snowboard binding hole spacing (4x4, 2x4, Channel)? · Standard part · basis: Burton binding-mounting guide (maker's published patterns)

Also called: snowboard insert pattern, 4x4 binding pattern, 2x4 binding pattern, burton channel m6, snowboard hole spacing, binding disc pattern, snowboard inserts mm

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
5 in table

Notes

  • A snowboard is over 1 m; the binding-insert pattern is what stomp pads, mounts, wall racks and binding discs are designed around. Patterns and spacing are as Burton publishes them in its binding-mounting guide.
  • Discs come in 4x2, 4x4, 3D and Channel formats; one disc fits one pattern.
  • Not published (so no file): the number of holes in each row, the insert thread for 4x4 / 2x4 / 3D boards, the 3D triangle size, and the Channel slot width. Measure your board once.

Snowboard binding insert patterns: 4x4, 2x4, 3D and Channel size chart

patternspacingthread / note
4x4two rows 40 mm apart, holes 40 mm apart in each rowinsert thread not stated by Burton
2x4 (4x2)two rows 40 mm apart, holes 20 mm apart in each rowinsert thread not stated by Burton
3Doverlapping triangles, 8 holes at each binding positiontriangle size not published
Channel (2010 and later)slot along the boardM6 Channel inserts
Channel (before 2010)slot along the boardM5 Channel inserts

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
insert patterns4x4: two rows 40 apart, holes 40 apart in a row; 2x4: rows 40 apart, holes 20 apart; 3D: 8 holes per binding position; Channel: slot along the board, M6 inserts (2010 on), M5 (before 2010)binding disc or mount bolts; thread of 4x4 / 2x4 / 3D inserts not publisheddesignedall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

BurtonHow to mount snowboard bindings (insert patterns, Channel M6 / M5)webPublisher's page; dimensions are facts

Xem scan

File coming

No downloadable true-size file yet: the published figures do not fix the whole shape, and Xem never guesses a number. A measured scan is planned; request it and it moves up.

Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=snowboard-binding-insert-patterns

Schematic, not to scale.

Fits with

Questions

What is the 4x4 snowboard pattern?

Two rows of inserts 4 cm apart with holes 4 cm apart in each row.

What thread is Burton Channel?

M6 on boards from 2010 on; M5 on earlier Channel boards.